PDF(100.4 KB) View with Adobe Reader on a variety of devices
Updated:January 2, 2014
Document ID:1518680361866616
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
3143 - Amended
Cisco announces the end-of-sale and end-of life dates for the Cisco 1600, 1700, 2600, 2800, 3600, 3700, and 3800 Series ISDN BRI S/T Interface Card . The last day to order the affected product(s) is July 1, 2006. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco 1600, 1700, 2600, 2800, 3600, 3700, and 3800 Series ISDN BRI S/T Interface Card
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
October 31, 2005
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
July 1, 2006
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
October 1, 2006
End of SW Maintenance Releases Date: HW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
July 1, 2007
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
May 1, 2007
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
July 1, 2007
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
January 1, 2011
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
July 1, 2011
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
Additional Information
WIC-1B-S/T
1-Port ISDN WAN Interface Card(dial and leased line)
WIC-1B-S/T-V3
1-Port ISDN WAN Interface Card (dial and leased line)
--
WIC-1B-S/T=
1-Port ISDN WAN Interface Card(dial and leased line)
WIC-1B-S/T-V3
1-Port ISDN WAN Interface Card (dial and leased line)
--
Product Migration Options
The recommended replacement for the 1-port WIC (part number WIC-1B-S/T) is the new 1-port WIC (part number WIC-1B-S/T-V3; Table 3). The WIC option offers a single ISDN Basic Rate Interface (BRI) port (with optional NT1). The new 1-port WIC inserts into a mixed-media network module (part number NM-1FE2W-V2,NM-2FE2W-V2,NM-1FE1R2W,or NM-2W); it also is supported on the Cisco 1700,1800,2600XM,2800,3700,and 3800 series routers. It provides a cost-effective ISDN router with the following benefits of integration: CBCB Fewer devices and cables to deploy and manage CBCB Remote and local configuration, monitoring, and troubleshooting through the Cisco IOSCBCB. Software CLI and Simple Network Management Protocol (SNMP) CBCB Flexibility and investment protection CBCB Single-vendor support CBCB Enhanced reliability CBCB Physical space savings The ability to add BRI connectivity through a WIC enables administrators to maximize valuable slot space while providing additional connectivity options on the same module such as Fast Ethernet.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to:
http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Cisco 1600, 1700, 2600, 2800, 3600, 3700, and 3800 Series ISDN BRI S/T Interface Card through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.
Feedback