End-of-Sale and End-of-Life Announcement for Selected Cisco 1841 T1 Router Bundles with IOS IP Base and IOS Advanced Security (CISCO1841-T1 and CISCO1841-T1SEC/K9)
PDF(100.1 KB) View with Adobe Reader on a variety of devices
Updated:June 22, 2009
Document ID:1518680372914627
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL6816
Cisco® announces the end-of-sale and end-of life dates for Selected Cisco 1841 T1 Router Bundles with IOS® IP Base and IOS Advanced Security ((CISCO1841-T1 and CISCO1841-T1SEC/K9). The last day to order the affected product(s) is December 21, 2009. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Selected Cisco 1841 T1 Router Bundles with IOS IP Base and IOS Advanced Security (CISCO1841-T1 and CISCO1841-T1SEC/K9)
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
June 22, 2009
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
December 21, 2009
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
March 21, 2010
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
December 21, 2010
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
December 21, 2010
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
March 18, 2014
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
December 20, 2014
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
CISCO1841-T1
1841 bundle with WIC-1DSU-T1-V2, IP Base, 32FL/128DR
CISCO1841-T1-V2
1841 bundle with HWIC-1DSU-T1, IP Base, 32FL/128DR
CISCO1841-T1SEC/K9
1841 Security Bundle with WIC-1DSU-T1-V2, Adv. Sec., 64FL, 256DR
C1841-T1SEC-V2/K9
1841 Security Bundle with HWIC-1DSU-T1, Adv. Sec., 64FL, 256DR
Product Migration Options
Customers are encouraged to migrate to the new Cisco 1841 T1 Router bundles with product ID numbers CISCO1841-T1-V2 and C1841-T1SEC-V2/K9. These new products offer feature parity with previous bundles and now include the 1-Port T1/Fractional T1 DSU/CSU High-Speed WAN Interface Card (HWIC-1DSU-T1), insuring the long-term availability of this important solution.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to
http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Service prices for Cisco products are subject to change after the product End of Sale date.
Feedback