Guest

Cisco 12000 Series Routers

EoS and EoL for Cisco 12000 Series 10-Slot 50-Gbps and 16-Slot 80-Gbps Legacy Fabric

  • Viewing Options

  • PDF (110.9 KB)
  • Feedback

EOL6223

Cisco ® announces the end-of-sale and end-of life dates for the Cisco 12000 Series 10-Slot 50-Gbps and 16-Slot 80-Gbps Legacy Fabric. The last day to order the affected product(s) is December 9, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco 12000 Series 10-Slot 50-Gbps and 16-Slot 80-Gbps Legacy Fabric

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

December 10, 2007

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

December 9, 2008

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

March 10, 2009

End of SW Maintenance Releases Date:
OS SW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

December 9, 2011

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

December 9, 2009

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

December 9, 2009

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

March 9, 2013

Last Date of Support:
HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

December 8, 2013


HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

12010-CSC

12010 Advanced Clock Scheduler Card

12010E-CSC

Enhanced Clock Scheduler Card for Cisco 12010

12010-CSC=

12010 Advanced Clock Scheduler Card

12010E-CSC=

12010 50Gbps Enhanced Clock Scheduler

12010-SFC

12010 Advanced Switch Fabric Card

12010E-SFC

Enhanced Switch Fabric Card for Cisco 12010

12010-SFC=

12010 Advanced Switch Fabric Card

12010E-SFC=

Enhanced Switch Fabric Card for Cisco 12010

12010/50

50Gbps Fabric Option with 5xSFC and 2xCSC for 12010 chassis

12010E/50

50Gbps Enhanced Fabric with 5SFC and 2CSC for Cisco 12010

12016/80

80Gbps Fabric Option with 3xSFC and 2xCSC for 12016 Chassis

12016E/80

Cisco 12016 80Gbps Enhanced Fabric with 3SFC and 2CSC

GSR16/80-CSC

Cisco 12016 80 Gbps GSR Scheduler/Fabric

12016E-CSC

80Gbps Enhanced Clock Scheduler Card for Cisco 12016

GSR16/80-CSC=

Cisco 12016 80 Gbps GSR Scheduler/Fabric Spare

12016E-CSC=

80Gbps Enhanced Clock Scheduler Card for Cisco 12016

GSR16/80-SFC

Cisco 12016 80 GbpsGSR Switch Fabric

12016E-SFC

Enhanced Switch Fabric Card for Cisco 12016

GSR16/80-SFC=

Cisco 12016 80 GbpsGSR Switch Fabric Spare

12016E-SFC=

Enhanced Switch Fabric Card for Cisco 12016

Product Migration Options

Customers are encouraged to migrate to the Cisco 12000 Series 10-Slot 50-Gbps and 16-Slot 80-Gbps Enhanced Fabric. Information about this product can be found at: http://www.cisco.com/en/US/products/hw/routers/ps167/prod_models_home.html.

Note: Upgrades to enhanced fabric may also require Cisco IOS Software upgrades, memory upgrades, and other upgrades to current systems.

Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the end-of-sale product through the Cisco Certified Refurbished Equipment program. Refurbished units of the end-of-sale product are available in limited supply for sale in certain countries on a first-come, first-served basis. For information about the refurbished equipment program, go to: http://cisco.com/go/remarketing.

For More Information

For more information about the Cisco 12000 Series 10-Slot 50-Gbps and 16-Slot 80-Gbps Enhanced Fabric, visit http://www.cisco.com/en/US/products/hw/routers/ps167/prod_models_home.html, or contact your local account representative.
To request information about the Cisco 12000 Series 10-Slot 50-Gbps and 16-Slot 80-Gbps Enhanced Fabric, send an e-mail to ask-gsr-pm@cisco.com.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.