Guest

Cisco 10000 Series Routers

EoS/EoL Announcement for the Cisco 10000 Series Performance Routing Engine

  • Viewing Options

  • PDF (142.3 KB)
  • Feedback

Product Bulletin No. EOL1050

Cisco Systems ® announces the end-of-sale and end-of-life dates for the Cisco ® 10000 Series Performance Routing Engine (PRE-1). The last day to order the affected product is August 17, 2006. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) until August 17, 2011. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product. Table 2 lists the product part numbers affected by this announcement.
Customers are encouraged to migrate to the Cisco 10000 Series Performance Routing Engine (PRE-2), which offers higher scalability. Information about the replacement product can be found at: http://www.cisco.com/en/US/products/hw/routers/ps133/products_data_sheets_list.html.
Table 3 provides relevant information for migrating to the replacement product.

Table 1. End-of-Life Milestones and Dates for the Cisco 10000 Series PRE-1

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

February 17, 2006

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

August 17, 2006

Last Ship Date

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

November 17, 2006

End of SW Maintenance Releases Date

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

August 17, 2009

End of Routine Failure Analysis Date

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

August 17, 2007

End of New Service Attachment Date

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

August 17, 2007

End of Service Contract Renewal Date

The last date to extend or renew a service contract for the product.

February 17, 2010

Last Date of Support

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

August 17, 2011

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

ESR-PRE1(=)

Cisco 10000 Series PRE-1

ESR-PRE2(=)

Cisco 10000 Series PRE-2

ESR-PRE1/R

Redundant Performance Routing Engine, 512 DRAM and 32M Flash 

ESR-PRE2/R

Performance Routing Engine, 1GB DRAM, 64MB Flash 

ESR10008-1P1AC 

C10000 8-slot chassis,1 PRE, 1 AC PEM 

10000-1P2-1AC 

Cisco 10000 eight-slot chassis, 1 PRE2, 1 AC PEM 

ESR10008-2P2AC 

C10000 8-slot chassis,2 PREs, 2 AC PEMs

10000-2P2-2AC 

Cisco 10000 eight-slot chassis, 2 PRE2s, 2 AC PEMs

ESR10008-1P1DC 

C10000 8-slot chassis,1 PRE, 1 DC PEM 

10000-1P2-1DC 

Cisco 10000 eight-slot chassis, 1 PRE2, 1 DC PEM 

ESR10008-2P2DC 

C10000 8-slot chassis,2 PREs, 2 DC PEMs

10000-2P2-2DC 

Cisco 10000 eight-slot chassis, 2 PRE2s, 2 DC PEMs

ESR10008-1P1AC+4CH 

C10000 8-slot chassis,1 PRE, 1 AC PEM, 1 CH STM-1 Module

10000-1P2-1AC 

Cisco 10000 eight-slot chassis, 1 PRE2, 1 AC PEM 

ESR10008-2P2AC+4CH 

C10000 8-slot chassis,2 PREs, 2 AC PEMs, 1 CH STM-1 Module

10000-2P2-2AC 

Cisco 10000 eight-slot chassis, 2 PRE2s, 2 AC PEMs

ESR10008-1P1DC+4CH 

C10000 8-slot chassis,1 PRE, 1 DC PEM, 1 CH STM-1 Module

10000-1P2-1DC 

Cisco 10000 eight-slot chassis, 1 PRE2, 1 DC PEM 

ESR10008-2P2DC+4CH  

C10000 8-slot chassis,2 PREs, 2 DC PEMs, 1 CH STM-1 Module

10000-2P2-2DC 

Cisco 10000 eight-slot chassis, 2 PRE2s, 2 DC PEMs

ESR10008-1P1AC+6

C10000 8-slot chassis,1 PRE, 1 AC PEM, 1 CH STM-1 Module

10000-1P2-1AC 

Cisco 10000 eight-slot chassis, 1 PRE2, 1 AC PEM 

ESR10008-2P2AC+6

C10000 8-slot chassis,2 PREs, 2 AC PEMs, 1 CH STM-1 Module

10000-2P2-2AC-CT3 

Cisco 10000 8-slot chassis, 2 PRE2s, 2 AC PEMs, 3 HH-4CT3

ESR10008-1P1DC+6

C10000 8-slot chassis,1 PRE, 1 DC PEM, 1 CH STM-1 Module

10000-1P2-1DC 

Cisco 10000 eight-slot chassis, 1 PRE2, 1 DC PEM 

ESR10008-2P2DC+6

C10000 8-slot chassis,2 PREs, 2 DC PEMs, 1 CH STM-1 Module

10000-2P2-2DC-CT3 

Cisco 10000 8-slot chassis, 2 PRE2s, 2 DC PEMs, 3 HH-4CT3

PRODUCT MIGRATION OPTIONS

The recommended replacement for the Cisco 10000 Series PRE-1 is the Cisco 10000 Series PRE-2 (Table 3). The PRE-2 offers more forwarding capacity, scalability, and features than the PRE-1.

Table 3. Product Comparisons

Feature

Cisco 10000 Series PRE-1

Cisco 10000 Series PRE-2

Forwarding capacity

2.8 Mpps

6.2 Mpps

Line card interconnect

1.6 Gbps

3.2 Gbps

Route processor memory

512 MB

1024 MB

Packet memory

128 MB

256 MB

Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about the Cisco TMP, go to http://www.cisco.com/go/tradein. The Cisco TMP application requires all users to have a Cisco.com user ID.

FOR MORE INFORMATION

For more information about the Cisco 10000 Series, visit http://www.cisco.com/go/10000 or contact your local account representative.
For more information about the Cisco uBR10012, visit http://www.cisco.com/en/US/products/hw/cable/ or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.