Guest

Cisco Video Surveillance 7000 Series IP Cameras

Cisco Video Surveillance 7030 IP Camera Data Sheet

  • Viewing Options

  • PDF (189.5 KB)
  • Feedback

The Cisco® Video Surveillance 7030 IP Camera is an outdoor, high-definition, full-functioned video endpoint with industry-leading image quality and processing power. The camera is capable of a 2560 x 1920 resolution while optimizing network utilization with either H.264 or MJPEG compression. Contact closures allow integration with access control systems. With its open, standards-based design, the camera provides an ideal platform for integration and operation as an independent device or as part of a Cisco Video Surveillance network.

The Cisco Video Surveillance 7030 IP Camera offers a variety of benefits, including:

True high-definition video: The camera streams crisp and clear video at resolutions up to 2560 x 1920 while maintaining low network bandwidth.

Outdoor-ready: An IK10 and IP66-rated enclosure enables outdoor mounting.

Dual streaming: The camera can stream H.264 and MJPEG video simultaneously. Each video stream can be configured with individual resolution, quality, and frame rate settings.

Day/night operation: The camera provides true day/night functionality and includes an infrared filter that automatically switches to night mode in low-light scenes. This function can be set to manual, automatic, or scheduled control.

Integrated infrared illuminator: The infrared illuminator can light an area up to 20 meters away.

Privacy regions: The camera supports up to four user-defined privacy regions. Any video within a privacy region is masked in the video stream.

Local storage: Video data can automatically be recorded to a microSD card when the camera loses network connectivity.

Bidirectional audio: The camera supports full-duplex audio and options for half-duplex operation.

Open API: Support for ONVIF 2.0 allows for standards based interoperability and communications with other ONVIF appliances.

Flexible power options: The camera supports Power over Ethernet (PoE) 802.3af or 24 VAC power through an optional external power supply.

Medianet support: The camera supports the Cisco Medianet interface. When connected to a Cisco switch that also supports Medianet, the switch recognizes the camera as a video endpoint and then uses SmartPort macros to set the right network parameters for the video stream on the network. In addition, the camera can be automatically discovered and configured when connected to Cisco Video Surveillance Manager 7.0, thereby minimizing installation time and cost.

Features

Table 1 describes the features of the Cisco Video Surveillance 7030 IP Camera.

Table 1. Cisco Video Surveillance 7030 IP Camera Features

Item

Specification

Imaging device

1/2.5-in. progressive-scan CMOS

Image control

Automatic white balance (AWB), automatic gain control (AGC), automatic exposure shutter (AES), and auto and manual iris

Wide dynamic range

80 dB

Minimum illumination

• Color: 0.1 lux
• B/W: 0 lux w/illuminator active

Lens

3-9 mm

DC-Iris

Remote focus and zoom

Field of view

35.45° to 88.90° (horizontal)

26.69° to 67.01° (vertical)

43.99° to 111.00° (diagonal)

Camera angle adjustment

Pan: 350°

Tilt: 80°

Rotate: 350°

Shutter speed

1/5 sec. to 1/32,000 sec

Video compression

H.264 and MJPEG

Audio compression

G.711 A-Law, G.711 U-Law, G.726

Resolution and frame rate (H.264)

Refer to Tables 2 and 3

Resolution and frame rate (MJPEG)

Refer to Tables 2 and 3

Video streaming

• Single-stream H.264 up to 2560 x 1920 @ 5 fps
• Single-stream MJPEG up to 1920 x 1080 @ 30 fps
• Dual-stream H.264 and MJPEG
• Primary stream programmable up to 1280 x 720 @ 30 fps
• Secondary stream programmable up to 960 x 540 @ 15 fps

Protocols

Dynamic Host Control Protocol (DHCP), Hypertext Transfer Protocol (HTTP), Secure HTTP (HTTPS), Network Time Protocol (NTP), Real-Time Transport Protocol (RTP), Real-Time Streaming Protocol (RTSP), Simple Mail Transfer Protocol (SMTP), Secure Sockets Layer/Transport Layer Security (SSL/TLS), Transmission Control Protocol/Internet Protocol (TCP/IP), Secure Real-Time Transport Protocol (SRTP), Cisco Discovery Protocol, Bonjour, Simple Network Management Protocol (SNMP), and Secure Shell (SSH)

Quality of service (QoS)

Differentiated services code point (DSCP) marking and class of service (CoS) marking

Power

24 VAC through optional external power supply

PoE (802.3af)

Power consumption (max)

AC: 7.3W

PoE: 7.6W

Table 2 lists the video stream support for the Cisco Video Surveillance 7030 IP Camera.

Table 2. Cisco Video Surveillance 7030 IP Camera Video Stream Support

Primary (H.264)

Maximum fps

Secondary (H.264 or MJPEG)

Maximum fps

2560x1920

8

NA

-

1920 x 1080

30

NA

-

1920 x 1080

15

1024 x 576

960 x 544

768 x 432

704 x 400

640 x 368

352 x 208

320 x 192

192 x 112

160 x 96

15

1536 x 864

30

1024 x 576

960 x 544

768 x 432

704 x 400

640 x 368

352 x 208

320 x 192

192 x 112

160 x 96

15

1472 x 832

30

1024 x 576

960 x 544

768 x 432

704 x 400

640 x 368

352 x 208

320 x 192

192 x 112

160 x 96

15

1280 x 720

30

1024 x 576

960 x 544

768 x 432

704 x 400

640 x 368

352 x 208

320 x 192

192 x 112

160 x 96

15

1024 x 576

30

1024 x 576

960 x 544

768 x 432

704 x 400

640 x 368

352 x 208

320 x 192

192 x 112

160 x 96

15

960 x 544

30

960 x 544

768 x 432

704 x 400

640 x 368

352 x 208

320 x 192

192 x 112

160 x 96

15

768 x 432

30

768 x 432

704 x 400

640 x 368

352 x 208

320 x 192

192 x 112

160 x 96

15

704 x 400

30

704 x 400

640 x 368

352 x 208

320 x 192

192 x 112

160 x 96

15

640 x 368

30

640 x 368

352 x 208

320 x 192

192 x 112

160 x 96

15

352 x 208

30

352 x 208

320 x 192

192 x 112

160 x 96

15

320 x 192

192 x 112

160 x 96

30

320 x 192

192 x 112

160 x 96

15

192 x 112

160 x 96

30

192 x 112

160 x 96

15

160 x 96

30

160 x 96

15

Table 3 lists the video stream support for the Cisco Video Surveillance 7030 IP Camera for 4:3 aspect ratios.

Table 3. Cisco Video Surveillance 7030 IP Camera Video Stream Support for 4:3 Aspect Ratios

Primary (H.264)

Maximum fps

Secondary (H.264 or MJPEG)

Maximum fps

720 x 480/576

30/25

720 x 480/576

704 x 480/576

352 x 240/288

15

704 x 480/576

30/25

704 x 480/576

352 x 240/288

15

352 x 240/288

30/25

352 x 240/288

15

Connectors

Table 4 describes the connectivity and connectors of the Cisco Video Surveillance 7030 IP Camera.

Table 4. Cisco Video Surveillance 7030 IP Camera Connectors

Item

Specification

Network connectivity

100 BASE-TX Ethernet with RJ-45 connector

Alarm input

Three logic level programmable

Alarm output*

One logic level programmable

Storage

MicroSD card slot

Audio

• 3.5-mm audio jack: Audio input for optional external microphone and audio output for optional external speaker supported through Y-cable adapter
• Two-way (full- and half-duplex), one-way, or audio off

Power Input

Terminal block

* Not supported when the camera is used with Cisco Video Surveillance Manager.

Software

Table 5 describes the primary features of the Cisco Video Surveillance 7030 IP Camera software.

Table 5. Cisco Video Surveillance 7030 IP Camera Primary Software Features

Item

Specification

Activity detection

User-definable alerts with configurable sensitivities and thresholds, e-mail alert, and HTTP notifications

Video format

NTSC and PAL

Image settings

Configurable brightness, sharpness, contrast, saturation, hue, and white balance

Overlay capabilities

Time, date, and text

Selectable bit rate

Support for constant bit rate or variable bit rate* (constant quality)

IP filtering

Users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settings

Discovery

Cisco Discovery Protocol, Bonjour Zero-Configuration discovery

Configuration

• Browser-based using Internet Explorer 8 and later
• Two levels of user access with password protection

Security

Support for IEEE 802.1X authentication

Specifications

Table 6 provides specifications of the Cisco Video Surveillance 7030 IP Camera.

Table 6. Cisco Video Surveillance 7030 IP Camera Mechanical Specifications

Item

Specification

Housing

Aluminum

LEDs

Power and activity

Dimensions

(D x H)

6.9 x 4.5 in. (174 x 115 mm)

Weight

1453 g

Certifications

Safety:

• UL60950-1 2 nd edition
• CSA22.2-No.60950-1
• IEC/EN60950-1 2 nd edition
• IEC/EN60825

EMC-Requirements:

• CISPR22 Class B
• ICES-003
• EN55022
• EN55024
• EN61000-3-2/-3-3 Class A
• VCCI Class B
• KN22 Class B
• KN24

Operating Temperature

-20 to 50°C (-4 to 122°F)

Cold startup: -20°C

Figure 1 shows the dimensions of the Cisco Video Surveillance 7030 IP Camera.

Figure 1. Cisco Video Surveillance 7030 IP Camera Dimensions

All dimensions are in millimeters.

Package Contents

Table 7 describes the items that ship with the Cisco Video Surveillance 7030 IP Camera.

Table 7. Package Contents

Item

Cisco Video Surveillance 7030 IP Camera

Installation template and alignment sticker

Bushing and connectors

L-type hex wrench

Screws and nuts

Desiccant pack

Documentation reference card

Regulatory documentation

Availability

The Cisco Video Surveillance 7030 IP Camera is available through Cisco Authorized Technology Provider (ATP) Partners.

Ordering Information

Table 8 lists the part numbers for the Cisco Video Surveillance 7030 IP Camera and accessories.

Table 8. Ordering Information

Part Number

Description

CIVS-IPC-7030

Cisco Video Surveillance 5-MP IP Outdoor Dome Camera

CIVS-6KA-VRD-C

Clear Vandal-Resistant Dome

CIVS-6KA-VRD-S

Smoked Vandal-Resistant Dome

CIVS-AVCABLE

Audio Video Cable for 35xx, 6k, and 7k Series IP Cameras

Using the Camera with Cisco Video Surveillance Manager

Features that are marked with an asterisk (*) are not supported when using the camera with Cisco Video Surveillance Manager. Please refer to the release notes for Cisco Video Surveillance Manager 6.3 for more information: http://www.cisco.com/en/US/docs/security/physical_security/video_surveillance/network/vsm/release_notes/6_3/vsm_rn_63.html.

Services and Support

Cisco and our certified partners can help you accelerate success and improve the return on your investment in a Cisco Physical Security solution. The Cisco lifecycle approach to services defines the requisite activities at each phase of the solution lifecycle:

• Reduce deployment costs by identifying the features that will best meet your business requirements

• Accelerate migration by assessing the readiness of your network to support the system and by developing a sound design

• Support smooth implementation through effective planning and expert installation, configuration, and integration

• Increase operational efficiency and extend the value of your investment with award-winning technical support

For more information about Cisco services, visit http://www.cisco.com/go/services.

For More Information

For more information about the Cisco Video Surveillance 7030 IP Camera, please visit http://www.cisco.com/go/videosurveillance or contact your local account representative.