Guest

Cisco IP Interoperability and Collaboration System

Cisco Universal Media Services

  • Viewing Options

  • PDF (248.4 KB)
  • Feedback

Product Overview

The Cisco ® Universal Media Service (UMS) is a critical component of the Cisco IP Interoperability and Collaboration System (IPICS) that enforces talkgroup memberships defined and controlled by Cisco IPICS Server. Cisco UMS mixes audio from multicast and Session Initiation Protocol (SIP) streams and broadcasts it back to other multicast and SIP streams, offering an extensible, upgradable platform for media services.
Cisco UMS bridges multicast and unicast users, performs proxy mixing for resource-constrained endpoints, and provides G.711 and G.729 transcoding services so that local Cisco IPICS Dispatch Consoles (IDCs), remote IDCs, and IP phones can participate in the same virtual talkgroup. Cisco UMS supports the creation of virtual talkgroups composed of diverse endpoints.

Figure 1. Cisco UMS on 2-RU Cisco Physical Security Multiservices Platform

Figure 2. Cisco Unified Computing System for Virtualized UMS

Features and Benefits

Cisco UMS performs functions similar to those performed by the router media service (RMS) and is controlled by the Cisco IPICS Server. Table 1 shows the new features in Cisco UMS.

Product Specifications

Table 1. Cisco UMS Features and Descriptions

Feature

Description

Audio mixing

Mixes audio from multicast and SIP streams and broadcasts the mixed audio to other multicast and SIP streams.

Talker ID

Supports Talker ID between multicast and SIP endpoints, including Project 25 (P25) and other signaling supported through serially controlled donor radios.

Dispatch from IP SIP endpoints

Provides radio control from SIP endpoints, removing the need for expensive proprietary handsets.

Improved multicast voice quality

Contains an improved voice quality algorithm that allows for better multicast mixing.

Supports Apple iPhones and Cisco IP phones as dispatching endpoints*

Allows remote users to join audio and video communications as part of a virtual talkgroup. This allows users from proprietary radio networks or systems to connect to Wi-Fi or public carrier networks using smartphones with the IPICS mobile client.

Virtualized proxy mixing

Mixes proxy users so that audio processing can occur either on a network appliance or in a virtualized environment, which enables the existing network infrastructure to be reused.

Audio transcoding

Provides G.711 and G.729 audio transcoding between local dispatchers, remote dispatchers, smartphone users, and IP phones. Transcoding is assigned in a round-robin type fashion to ensure distributed resources.

High availability

Provides audio high availability through the use of a high availability server. If the primary server goes down, the secondary server automatically takes over.

*Check the IPICS compatibility matrix for a list of compatible smartphones: http://www.cisco.com/en/US/products/ps7026/tsd_products_support_series_home.html

Architecture

As a Linux-based solution, Cisco UMS can run on a wide range of platforms, including the 2-RU Cisco Physical Security Multiservices Platform server with two hard drives, and the Cisco UCS ® B-Series, C-Series, and E-Series servers.
Cisco UMS comprises the following functional building blocks (Figure 3).

• IPICS Server interface

• Virtual talkgroup support

• G.711 to G.729 transcoding

• Proxy mixing

• SIP support

Figure 3. Cisco Unified Media Service Functional Diagram

UMS and RMS

Cisco UMS extends the RMS functionality in current IPICS deployments. The RMS is router-based software that provides channel mixing (bridging of multicast channels) and support for remote IDC users. Cisco UMS has advanced signaling, which informs users of who's talking (talker ID) or, in native P25 mode, the dispatcher's talker ID will be sent to all subscribers.
In the RMS, configuration can be done manually in Cisco IOS ® Software (dial peers, multicast-unicast-multicast [MUM] trunks, etc.) or can be run in Cisco Unified Communications Manager Express. With Cisco UMS, although manual configuration can be done from the command line interface (CLI), the change state is not maintained when the IPICS Server alters any configuration. Table 2 compares Cisco RMS and UMS.

Table 2. Cisco RMS and UMS Comparison

Feature

RMS

UMS

IPICS Channel

Yes

Yes

IPICS VTG

Yes

Yes

IPICS radio

Yes

Yes

SIP

Yes

Yes

Multicast

Yes

Yes

G.711

Yes

Yes

G.729

Yes

Yes

Talker ID multicast talkgroup

Yes

Yes

Talker ID SIP

No

Yes

Talker ID virtual talkgroup

No

Yes

Talker ID P25

No

Yes (P25 or IPICS user ID)

Direct dial

Yes

No

MUM trunks

Yes

No

Simultaneous sessions

120

100

High availability

Yes; Layer 3

Yes; appliance

IP compliance (IANA)

IPv4

IPv4

Table 3 provides ordering information.

Table 3. Ordering Information

Part Number

Description

CIS-UMS-K9

UMS Appliance: Order as an option for the 2-RU Cisco Physical Security Multiservices Platform or as an option for the Virtualized IPICS Software (CIS-IPICS-VM) for physical delivery. For eDelivery, use L-CIS-IPICS-VM=.

CIS-UMS-HA

UMS HA Appliance: Order one for each UMS that requires high availability.

CIS-IPICS-VM

Virtualized IPICS Software: Order this for a virtualized version of the UMS, and structure all previous software as options to this part number.

L-CIS-IPICS-VM=

Order this for a virtualized version of the UMS and structure all the previous software options to this part number. This will generate an e-Delivery license.

Summary

Cisco UMS is an integral part of the Cisco IPICS system and is the key enabler for enforcing P25 audio communications. Cisco IPICS provides secure, reliable, and scalable communications to organizations using the IP network as the core infrastructure.

Additional Information

Please contact your local or regional Cisco account representative for Cisco IPICS ordering information.

Services and Support

Cisco and our certified partners can help you accelerate success and improve the return on your investment in a Cisco IPICS solution. The Cisco lifecycle approach to services defines the requisite activities at each phase of the solution lifecycle:

• Reduce deployment costs by identifying the features that will best meet your business requirements.

• Accelerate migration by assessing the readiness of your network to support the system and by developing a sound design.

• Support smooth implementation through effective planning and expert installation, configuration, and integration.

• Increase operational efficiency and extend the value of your investment with award-winning technical support.

For more information about Cisco services, visit http://www.cisco.com/go/services.
For More Information
For more information about Cisco IPICS, visit http://www.cisco.com/go/ipics or contact your local account representative.
Text Box: Printed in USA	C78-728718-00	06/13