Guest

Cisco ONS 15600 Series

EoS/EoL for Cisco ONS 15600 SDH Multiservice Provisioning Platform (MSPP) 1.4

  • Viewing Options

  • PDF (90.6 KB)
  • Feedback

EOL5837

Cisco® announces the end-of-sale and end-of-life dates for the Cisco ONS 15600 SDH Multiservice Provisioning Platform (MSPP), Release 1.4. The last day to order the affected product(s) is January 30, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco ONS 15600 SDH Multiservice Provisioning Platform (MSPP), Release 1.4

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

August 1, 2007

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

January 30, 2008

Last Ship Date: HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

April 29, 2008

End of Routine Failure Analysis Date: HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

January 29, 2009

End of New Service Attachment Date: HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

January 29, 2009

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

April 26, 2012

Last Date of Support: HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

January 28, 2013

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

15600-DOC1.4.0CD

Sys. Doc. SDH Rel 1.4.0 English, CD

15600E-DOC8.0.0CD

Sys. Doc. Rel 8.0.0 English, CD SDH

15600-DOC1.4.0CD=

Sys. Doc. SDH Rel 1.4.0 English, CD

15600E-DOC8.0.0CD=

Sys. Doc. Rel 8.0.0 English, CD SDH

15600-DOC1.4.0PP

Sys. Doc. SDH Rel 1.4.0 English, Paper

15600E-DOC8.0.0PP

Sys. Doc. Rel 8.0.0 English, Paper SDH

15600-DOC1.4.0PP=

Sys. Doc. SDH Rel 1.4.0 English, Paper

15600E-DOC8.0.0PP=

Sys. Doc. Rel 8.0.0 English, Paper SDH

15600-LIC-R1.4.0

Right to use sw license SDH R1.4.0,

15600E-LIC-8.0.0K9

15600 SDH Upgrade License for R8.0.0, Right To Use License

15600-R1.4.0SWCD

SDH Rel 1.4.0 Feature Pkg, CD

15600E-R8.0.0SWK9

15600 SDH Rel. 8.0.0 Feature Pkg., CD, Right To Use License

15600-R1.4.0SWCD=

SDH Rel 1.4.0 Feature Pkg, CD

15600E-R8.0.0SWK9=

15600 SDH Rel. 8.0.0 Feature Pkg., CD, Right To Use License

SF15600-R1.4.0

SDH Rel. 1.4.0 SW, Pre-loaded on TSC

SF15600E-R8.0.0K9

Rel. 8.0.0 SW, Pre-loaded on TSC SDH

Product Migration Options

Customers are encouraged to migrate to the Cisco ONS 15600 SDH Multiservice Provisioning Platform (MSPP), Release 8.0.0. Information relating to this software migration, and its hardware prerequisites, may be found at: http://www.cisco.com/univercd/cc/td/doc/product/ong/15600/15600r80/600eu80.htm.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the end-of-sale product through the Cisco Certified Refurbished Equipment program. Refurbished units of the end-of-sale product are available in limited supply for sale in certain countries on a first-come, first-served basis. For information about the refurbished equipment program, go to: http://cisco.com/go/remarketing.

For More Information

For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.