EoS and EoL for Cisco ONS15454 MSPP XC-10G Cross-Connect Card

Available Languages

Download Options

PDF (104.3 KB)
View with Adobe Reader on a variety of devices

Updated:January 14, 2008

Document ID:1518700942326911

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

EOL6299

Cisco ® announces the end-of-sale and end-of life dates for the Cisco ONS15454 MSPP XC-10G Cross-Connect Card. The last day to order the affected product(s) is December 30, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco ONS15454 MSPP XC-10G Cross-Connect Card


Milestone	Definition	Date
End-of-Life Announcement Date	The date the document that announces the end of sale and end of life of a product is distributed to the general public.	December 31, 2007
End-of-Sale Date	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	December 30, 2008
Last Ship Date: HW	The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.	March 31, 2009
End of Routine Failure Analysis Date: HW	The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.	December 30, 2009
End of New Service Attachment Date: HW	For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.	December 30, 2009
End of Service Contract Renewal Date: HW	The last date to extend or renew a service contract for the product.	March 30, 2013
Last Date of Support: HW	The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.	December 29, 2013

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement


End-of-Sale Product Part Number	Product Description	Replacement Product Part Number	Replacement Product Description
15454-10GCOMP-KIT	Includes 2ea TCC2P and XC-10G, 1ea FTA3-T AND SW RTU LIC	15454-10G-KIT-2	Includes 2ea TCC2P, XC-VXC-10G, 1ea CC-FTA AND SW RTU LIC
15454-SPARE2P-KIT	Includes 1ea TCC2P, XC-10G,XC-VT,SW RTU LIC,DOC	15454-SPARE-KIT-1	Includes 1ea TCC2P, XC-VT,XC-VXC-10G,SW RTU LIC,DOC
15454-XC-10G	Xconn, 1152 STS, 672 VT	15454-XC-VXC-10G	Cross-Connect Module, High Cap. Tributary
15454-XC-10G=	Xconn, 1152 STS, 672 VT	15454-XC-VXC-10G=	Cross-Connect Module, High Cap. Tributary

Product Migration Options

Customers are encouraged to migrate to the Cisco ONS15454 MSPP 60G/5G High-Order/Low-Order XC-VXC Cross-Connect Card (part number 15454-XC-VXC-10G). Information about this product can be found at: http://www.cisco.com/en/US/products/hw/optical/ps2006/products_data_sheet0900aecd8031a2d6.html.

Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.

Customers may be able to continue to purchase the end-of-sale product through the Cisco Certified Refurbished Equipment program. Refurbished units of the end-of-sale product are available in limited supply for sale in certain countries on a first-come, first-served basis. For information about the refurbished equipment program, go to: http://cisco.com/go/remarketing.

For More Information

For more information about the Cisco ONS15454 MSPP 60G/5G High-Order/Low-Order XC-VXC Cross-Connect Card, visit: http://www.cisco.com/en/US/products/hw/optical/ps2006/ps2010/index.html, or contact your local account representative.

For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.

To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.

Was this Document Helpful?

Feedback