Guest

Cisco ONS 15454 Series Multiservice Transport Platforms

Cisco ONS 15454 Multiservice Transport Platform Data Sheet

  • Viewing Options

  • PDF (1.4 MB)
  • Feedback

Product Overview

The Cisco® ONS 15454 Multiservice Transport Platform (MSTP) sets the industry benchmark for dense wavelength-division multiplexing (DWDM) solutions delivering simple, fast, and intelligent DWDM capabilities and lowering capital expenditures (CapEx) and operating expenses (OpEx).

When Cisco introduced the Cisco ONS 15454 Multiservice Provisioning Platform (MSPP) in 1999, a clear demarcation was created between what is considered “traditional” optical transport equipment and what is now considered “next-generation”. With its significant leap in technology and product migration, the Cisco ONS 15454 MSPP offered traditional time-division multiplexing (TDM) and SONET/SDH services as well as Ethernet and IP services. The platform was scalable and was the fraction of the size of traditional bit-rate–specific equipment. The Cisco ONS 15454 MSPP proved to be cost-effective, it effectively met the requirements for the new market segment, and it quickly established itself as the market leader.

Continuing with our tradition of innovation and leadership, Cisco introduced the Cisco ONS 15454 Multiservice Transport Platform (MSTP). The Cisco ONS 15454 MSTP (Figure 1) allows a DWDM system to become as intelligent and flexible as the highly successful Cisco ONS 15454 MSPP, including a wide service interface mix, service transparency, flexible topology, completely reconfigurable traffic pattern, and simplified operations. The platform supports a variety of modules to enable wide deployment scenarios including access, metro, regional, and ultra-long-haul networks.

Figure 1. Cisco ONS 15454 Multiservice Transport Platform M12 (12 service slots), M6 (6 service slots, bottom right), and M2 (2 service slots, top right)

Major Features and Benefits

The Cisco ONS 15454 MSTP provides capital and operational efficiency by addressing the increasing demand for multiple services, greater transport capacity, networking flexibility, multiple distance options, and management simplicity in a single platform. With innovative technology, Cisco ONS 15454 MSTP introduces intelligence to DWDM transmission, thus allowing the optimization of next-generation networks across multiple layers and removing costly Optical-Electrical-Optical (OEO) devices for network segmentation or regeneration.

The Cisco ONS 15454 MSTP provides features such as multilayer graphical network, node, and card visibility; comprehensive network-based service provisioning; and graphical software wizards to simplify and speed user operations for such tasks as initial network turn-up; service provisioning; and network, node, and bandwidth upgrades. The Cisco ONS 15454 MSTP uses an embedded software architecture and control plane to introduce a level of operational simplicity exceptional in DWDM networks.

The Cisco ONS 15454 MSTP delivers a comprehensive set of features, allowing customers worldwide to support the requirements of next-generation transport networks:

Scalable C-band wavelength count (40, 80, and 96) provides superior cost-growth trade-off.

Transport of 100-Mbps to 100-Gbps wavelength services, as well as aggregated TDM, Ethernet, and storage data services, provides maximum service flexibility and bandwidth optimization.

Multiple chassis options provide deployment flexibility and per-site customization. The 12-slot (17 slots total) M12 chassis is available with a –48 VDC power supply. The M6 chassis provides 6 available slots for traffic (8 slots total). Like the M12 chassis, it supports a multishelf configuration to extend the slot capacity of a network element. The M2 chassis provides 2 slots for traffic (3 slots total). The M2 and M6 chassis are available with modular AC and DC power supply options, and they support both ANSI and ETSI requirements.

Industry-leading 100 Gigabit technology allows the Cisco ONS 15454 MSTP to transmit at distances up to 4500 km. The MSTP supports a single-slot 100 Gigabit CP-DQPSK transponder, enabling up to 42 x 100 Gigabit transponders in a single half-depth 42-rack-unit (42RU) rack. For 10 Gigabit services, the ONS 15454 enables density of 30 x 10 Gigabit services per M6 shelf, and up to 420 x 10 Gigabit services per rack in a back-to-back deployment.

Efficient Gigabit Ethernet and 10 Gigabit Ethernet transport over DWDM with Ethernet Xponder service blades. The Xponder provides unprecedented flexibility to map Ethernet services directly onto a DWDM wavelength while performing a variety of Layer 1 or Layer 2 functions. This approach provides a more efficient use of available bandwidth and extraordinary Gigabit Ethernet–over-DWDM mapping and traffic policing flexibility. The capability to use G.709 encapsulation and forward error correction (FEC) on the 10 Gigabit Ethernet LAN-PHY wavelength helps ensure optimized performance and reach. Typical SONET/SDH-like operations, administration, maintenance, and provisioning (OAM&P) supports the management functions of previous SONET/SDH-type interfaces while interfacing directly to the DWDM layer. A patented protection scheme can react to failures in less than 50 ms.

The Cisco ONS 15454 MSPP-on-a-Blade Card combines 10-Gbps add/drop multiplexer (ADM) and transport functions to consolidate many of the aggregation functions traditionally performed by the MSPP. With one blade, carriers can now aggregate OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, OC-192/STM-64, and Gigabit Ethernet signals onto a single-wavelength trunk circuit. The capability to use G.709 encapsulation and FEC on the OC-192/STM-64 wavelength helps ensure optimized performances and reach, and complete OAM&P capabilities.

The 40-Gbps Enhanced FEC Full Band Tunable CP-DQPSK Muxponder Card and 40-Gbps CP-DQPSK Full C-Band Tunable Transponder Card provide exceptional performance for 40 Gigabit transmission, allowing the Cisco ONS 15454 MSTP to transmit at distances up to 4000 km.

Cisco ONS 15454 Any Rate Muxponder and Xponder Cards enable a wide variety of interfaces and protection capabilities in a single card. These capabilities enable a cost-effective architecture for aggregating a large variety of services over OTU-1 or OTU-2 DWDM wavelengths.

Flexible transmission capability up to 4500 km through the use of advanced Erbium-Doped Fiber Amplifier (EDFA) amplification, joint Raman and EDFA amplification, and FEC or enhanced FEC (EFEC) technologies supports a wide range of networking applications.

The Cisco ONS 15454 addresses low-latency deployment needs with low-latency transponder modes and low-latency Fiber Bragg Grating dispersion compensation units.

Fully reconfigurable optical add/drop multiplexers (ROADMs) offer superior network flexibility and reduced complexity.

Mesh and multiring topology support in the optical domain provides the ability to manage nodes facing up to 8 degrees. These capabilities allow Cisco ONS 15454 MSTP users to provide wavelength services and define virtual private DWDM networks, where a common transport infrastructure can be shared across multiple users or services.

Single-module ROADM (SMR) solutions dramatically improve system density and flexibility. The 40-channel single-module ROADM-2 (SMR-2) includes the optical service channel (OSC) add/drop filter, pre- and booster amplifiers, and a 4 x 1 Wavelength Selective Switch WSS-based ROADM core. This unit provides a simple and effective way to support multidegree nodes of up to 4 degrees, allowing in-service upgrade from 2 to 4 degrees. A 2-degree optimized version, the SMR-1, is also available; it includes the OSC add/drop filter, a preamplifier, and a 2 x 1 WSS-based ROADM core.

Omnidirectional and colorless support for ROADM nodes allows service creation and restoration in a fully automated way through software provisioning. This capability provides the foundation for control-plane interaction between upper layer client devices and the optical layer.

Fully automatic node and network setup provides the capability to use the intuitive DWDM network design tool (Cisco Transport Planner) for PC-aided design, installation, commissioning, and evolution of the network.

Multilevel service monitoring using SONET/SDH and digital-wrapper (G.709) technology provides complete monitoring and reporting of performance and quality parameters for Ethernet, storage area network (SAN), video, and TDM services.

Network topology autodiscovery supported at the network element level allows Element Manager System (EMS)-like functions directly through the platform-embedded software, Cisco Transport Controller.

Network- and node-level alarm correlation performed directly by the embedded network element software allows a simpler and faster reaction to fault situations by providing only the root cause of the problem to the management interface.

The integrated Cisco Transport Controller provides for network-based, point-and-click system and services setup and management.

Virtual transponder operation for routers (such as the Cisco CRS-3 Carrier Routing System) is equipped with a DWDM physical line interface module (PLIM), allowing end-to-end service provisioning between routers through the complete DWDM network directly from the Cisco Transport Controller.

Software-controlled optical power management fully automates network optical power control, critical during wavelength additions, site additions, and fast transient suppression in case of a fiber cut.

The network-level functional view gives Cisco ONS 15454 MSTP allows operators to manage and monitor optical circuits between source and destination nodes and collect all relevant data pertaining to optical power levels and performance monitoring.

Cisco Prime™ Optical, an advanced cross-platform optical network management system (NMS), provides unified network operations and interfaces to an operations support system (OSS).

In addition to the integrated software features, the Cisco ONS 15454 MSTP is supported by an easy-to-use but powerful network design tool, Cisco Transport Planner. Cisco Transport Planner is a user-friendly, Java-based application for modeling and optimizing DWDM networks based on the user’s network parameters. Cisco Transport Planner also reduces OpEx by simplifying network deployments through the following:

Simple drag-and-drop user operation for network and services definition

Optimized services and units allocation in case of network topology or traffic matrix changes for an already deployed network (delta planning)

Support for linear, ring, multiring, and mesh network topologies

Fully flexible network design with the ability to optimize the flexibility provided by the ROADMs (in the optical domain) and by the multirate cards (in the service and application domain)

Alien wavelength optical interface definition to allow the design of optical networks that can reuse existing or third-party DWDM interfaces, simplifying the migration of services and reducing the initial cost of new systems

Automatic equipment selection

Layered graphical views of network, wavelength services, and node layout, with the option to select between a card or a functional view of the node

Detailed port-to-port fiber-cabling table

Bill-of-materials (BOM) output

Network and node layout, with the option to collect and export data pertaining to power consumption, heat dissipation, and overall weight of the configuration

Exportable configuration file, which can be used for automated node-provisioning and quick network activations

Live network import, which allows the import of a network into Cisco Transport Planner to assist in performing network upgrades, capacity analysis, optical analysis, and troubleshooting and interface characterization

Wavelength Utilization View, which enables users to have a pictorial view of wavelengths used and available in the network, thereby helping future planning and providing an easy view of links running out of wavelengths.

Wide Service Interface Mix

The Cisco ONS 15454 MSTP supports a wide variety of interface and service types, which can be transparently transported through complex mesh or very simple point-to-point networks. The service interfaces allow network providers to offer new services and allow enterprise customers to natively transport a wide variety of services over a common network without unnecessary conversion stages and equipment. Additionally, a wide service mix simplifies the planning for services. The Cisco ONS 15454 MSTP supports a broad range of standards-based services in a single platform, including:

Optical Transport Network (OTN) wavelength and aggregated services: OTU-1, OTU-2, OTU-3, OTU-4

Data services: Private line, switched and wavelength-based, including 10BASE-T, 100BASE-T, Gigabit Ethernet, 10 Gigabit Ethernet LAN PHY and WAN PHY, 40 Gigabit Ethernet, and 100 Gigabit Ethernet

Storage services: 1-, 2-, 4-, 8-, and 10-Gbps Fibre Channel; IBM Fiber Connection (FICON) and Enterprise Systems Connection (ESCON); ETR/CLO; and ISC-1 and ISC-3

Video services: D1, DV6000, and high-definition television (HDTV)

SONET/SDH wavelength and aggregated services: OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, OC-192/STM-64, and OC-768/STM-256

Service Transparency

Critical to offering a wide service mix is the ability of a DWDM system to offer the level of transparency required by the service. The Cisco ONS 15454 MSTP solution offers the choice of multiservice aggregation, wavelength aggregation, and wavelength transport, combined with integrated, intelligent DWDM transmission in a single platform to minimize network costs for any mix of service types. Using digital-wrapper and OTN technologies (defined in ITU-T G.709) provides transparency, allows enhanced wavelength management, and provides extended optical reach through the integrated FEC and EFEC.

Another innovation is the capacity of the Cisco ONS 15454 MSTP to support direct interconnection with DWDM interfaces from Layer 2, Layer 3, and SAN devices. This element integration eliminates the need for costly and complex OEO conversions at the boundaries of the network or where the traffic simply needs to pass through a site without having to terminate on an upper-layer device.

Protection Options

The Cisco ONS 15454 MSTP provides multiple provisionable interface protection options, which facilitate support for high availability as well as unprotected service delivery to meet the varied service-level agreements (SLAs) for DWDM transport offerings.

Both 1 + 1 and shared protection schemes based on the principles of ITU-T recommendations are supported. The following types of 1+1 protection schemes can be supported:

Path protection: In this case it is possible to offer complete redundancy of the optical path at the network level, but no protection is offered for the unit that is originating the Working and Protect DWDM signals and is deciding between the two DWDM signals on the receive side.

This type of protection can be supported on individual wavelengths.

Path and equipment protection: In this case it is possible to offer complete redundancy of the optical path at the network level and of the units that are originating the Working and Protect DWDM signals and deciding between the two DWDM signals on the receive side.

Multiplex section protection: In this case it is possible to use the Cisco ONS 15454 MSTP Protection Switch Module unit to provide protection for the aggregated signal.

Shared Ethernet protection: This protection can be supported by the Gigabit Ethernet and 10 Gigabit Ethernet Xponder units using the innovative and patented Cisco G.709 Rapid Resilient Ring (GR3) Ethernet Protection mechanism when operating in Layer 2 mode. By integrating G.709 messaging with an Ethernet VLAN management mechanism, GR3 protection provides SONET/SDH-like switching times and reliability. A recovery time of less than 50 ms can be achieved mapping Ethernet directly over DWDM.

Optical layer restoration: The CiscoWavelength Switched Optical Networks (WSON) control-plane architecture enhances Generalized Multiprotocol Label Switching (GMPLS) capabilities with awareness of wavelength properties and optical impairments, offering dynamic service provisioning and 1 + R or 1 + 1 + R restoration on a flexible DWDM network.

Different units can support different protection options and feature different capabilities, which are described in more detail in the unit data sheets.


Topology Flexibility

One recent core network trend is the consolidation of multiple Layer 2 and Layer 3 networks into a single IP/Multiprotocol Label Switching (IP/MPLS) infrastructure. Despite this Layer 2 and 3 convergence, the underlying transport layer (Layer 1) of many service provider core networks has continued to use SONET/SDH. This situation has remained in many service provider networks globally, creating OpEx and CapEx concerns for service providers as well as challenges to profitability and return on investment (ROI). Some network inefficiencies result from the way core transport networks are built out to support the IP or service layer over the SONET/SDH layer, supported by an underlying DWDM infrastructure. The OEO conversions and the associated electrical processing promoted by the layered network architecture result in an additional cost for space, because many racks of shelves may be required in a service provider point of presence (POP), as well as additional power and cooling that is necessary because of the active electronics components that they contain.

You can configure the Cisco ONS 15454 MSTP to support any metro, regional, or core DWDM topology, allowing a single solution to be used for the overall network, independent of the topology and reach. The ultimate topology flexibility is achieved through a set of fully reconfigurable ROADMs. Multidegree ROADMs (2 through 8 degrees of freedom) allow wavelengths to remain in the optical domain while being passed from one ring or network segment to another, further eliminating the need for OEO conversions and using the ability of core routers to initiate DWDM-compatible wavelengths (Figure 2).

Figure 2. Topology Flexibility, Integrated DWDM Optics, and Optical Bypass

02_NextGenerationNetworkStrategy

The Cisco ONS 15454 MSTP offers ROADM capability that allows 0 to 80 channels of pass-through or add-drop, comprehensive wavelength provisioning, and full real-time power monitoring of each individual wavelength. Keeping traffic purely in the optical domain as much as possible has the added advantage of helping a transport network remain compatible with future technology. Pure optical transmission is inherently tolerant to bit-rate variations, and hence will potentially be more compatible with future transmission rates than electrical processing elements.


Product Specifications

With its multiservice capability, innovative optical technology, automatic optical power management, and MSPP-like ease of use, the Cisco ONS 15454 MSTP transforms the way DWDM networks can be built and managed. Combining multiple services and intelligent DWDM, the Cisco ONS 15454 MSTP significantly reduces both CapEx and OpEx for today’s metro and regional networks.

Node Configurations

Terminal

Hub

Line amplifier

OADM

Degree-2 ROADM

Degree-2 Single-Module ROADM

Multidegree ROADM

Multidegree Single-Module ROADM

Omnidirectional and colorless functions available on ROADMs

Network Configurations

Linear point-to-point

Ring (multiple-hub or no hub)

Multiring

Mesh

Advanced Intelligent Software Features

Cisco WSON Control Plane extending GMPLS by introducing linear and nonlinear optical impairment awareness for DWDM network

GMPSL User Network Interface (GMPLS-UNI) signaling interface to enable dynamic management by client devices

Network topology autodiscovery

Point-and-click node and network setup and regulation

Automatic network-level optical power management and monitoring

Single management interface (single IP address) for all the shelves in a node

Network-level alarm correlation for quick and easy troubleshooting (G.798-based)

Data communications network (DCN) extension to provide the capacity to use any available DCN access, including data communications channel (DCC) and generic communications channel (GCC) bytes, for management of nodes

Automatic node turn-up for installation and deployment without the use of Cisco Transport Planner parameters

Automatic network import into Network Planning tool for ease of performing network upgrades, capacity analysis, optical analysis, and troubleshooting and interface characterization

User Interface: Cisco Transport Controller

Integrated node and subnetwork craft GUI

Layered graphical views: Network, wavelength, node, shelf, and card

Network- and node-level functional view, automatically generated and aligned with equipment status for the capability to manage and collect performance-monitoring data end to end through the network between the source and the destination nodes

User-provisionable tab views, graphics, and fonts:

- Background maps

- Color schemes

Comprehensive wavelength circuit routing and creation

Network autodiscovery with provisionable subnetwork domain control

System inventory

PC-based Java client

Familiar browser interface

Complete performance-monitoring support:

- 15-minute (32 entries) and 24-hour (2 entries)

- Optical layer

- SONET/SDH layer

- Ethernet and SAN statistics

- ITU-T G.709 layer (including FEC and EFEC)

- Client interface type-specific

- Threshold-crossing alerts threshold setting

Alarm Monitoring and Reporting

Shelf LEDs: Critical, major, minor, and remote

Card LEDs: Card failure, active/standby state, and signal fail

Cisco Transport Controller craft interface:

Layered graphical views with real-time alarm text and coloring: Network, wavelength, node, shelf, and card

- Multiple technology views including DWDM and SONET/SDH with MSTP integration

Environmental alarm contacts:

- 4-alarm output contact closures (standard): Critical, major, minor, and remote

- Up to 48 provisionable alarm contacts in systems equipped with Alarm Interface Controller (AIC-I)

Network Security Features

Four-level user control with provisionable timeout durations: Super-user, provisioning, maintenance, and retrieve

Multiple usernames and logged-in users

RADIUS-based authentication

Secure Sockets Layer (SSL), Secure Shell (SSH) Protocol, and Secure HTTP (HTTPS)

Maintenance Features

Remote software downloads and in-service, hitless activation

Loopbacks

Database backup and restore

Lamp test

Timing and Synchronization

Two external timing-source inputs (SONET/T1 and SDH/E-1)

Line timing

Two timing-source outputs

Internal Stratum 3

Synchronous status-messaging support

Additional Features

100-Mbps user data channel (Fast Ethernet) transported on the optical supervisory channel (OSC)

Front only (ETSI) or front and rear access (ANSI) shelf assembly options

A and B fully redundant and monitored DC power inputs

Carrier-Class Availability

Delivery of better than 99,999-percent availability

All cards hot-swappable

Fully redundant network element processor and database

Compliance and Certifications

Network Equipment Building Standards (NEBS) Level 3 compliance

ITU-T and CE Mark compliance

Operations Systems Modification of Intelligent Network Elements (OSMINE) certifications

Storage-vendor qualification and certifications

MEF 9 and MEF 14 certification for Gigabit Ethernet and 10 Gigabit Ethernet Xponder units


Technical Specifications

Table 1 lists the supported modules for the Cisco ONS 15454 MSTP.

Table 1. Supported Modules

Module

Unit Name

Common Equipment

Shelf Assembly

M12 ANSI and ETSI shelf assembly

M6 shelf assembly with brackets

M6 chassis door (optional) and deep door version

M2 shelf assembly with brackets

M2 chassis door (optional) and deep door version

SA-HD, SA-HD-DDR, or SA-ETSI version

M6-SA (AC and DC options available)

M6-DR or M6-DDR

M2-SA (AC and DC options available)

M2-DR or M2-DDR

Fan-Tray Assembly

M12 fan-tray assembly

M6 fan-tray assembly

M2 fan-tray assembly with LCD status and backup memory

M6 chassis air filter

M2 chassis air filter

CC-FTA, FTA3-T (ANSI), or FTA-48V (ETSI)

M6-FTA or M6-FTA2

M2-FTA or M2-FTA2

M6-FTF

M2-FTF

Timing, Communications, and Control Card (TCC)

M12

M6

M2

TCC2P or TCC3

TNCE, TSCE, TNC, or TSC

TNCE, TSCE, TNC, or TSC

M12 Shelf Alarm Interface Controller (AIC) and Alarm Expansion Panel (AEP)

AIC-I (AEP option for ANSI)

Power, Craft, Alarm Mechanical Interface Cards

M12 (ETSI)

M6

M2

CTP-MIC48V

AP-MIC48V

M6-AC2, M6-AC or M6-DC, and M6-DC20

M6-PWRFLR

M6-LCD

M6-ECU, M6-ECU2, M6-ECU-60

M2-AC or M2-DC or M2-DC-E

Brackets and Air Deflectors (Optional Spares)

M6 19-, 21-, and 23-in. brackets

M6 21-in. air deflectors

M6 23-in. air deflectors

M2 19-, 21-, and 23-in. brackets

M2 21-in. air deflectors

M2 23-in. air deflectors

M6-BRKT

M6-DEFL21

M6-DEFL23

M2-BRKT

M2-DEFL21

M2-DEFL23

Air Ramp

AIR-RAMP

Slot Filler Card

Interface and control (12, M6 and M2)

Front Mount Electrical Connection (FMEC) (ETSI) – M12 only

Detectable control (M6 and M2)

Detectable line (M6 and M2)

M6 power module blank filler

BLANK

BLANK-FMEC

M-T-FILLER

M-FILLER

M6-PWRFLR

Multishelf Management Cards (M12)

Integrated multishelf switch

Ethernet adapter panel mechanical frame

Ethernet adapter panel

Multiple Ethernet cables

MS-ISC-100T

EAP-MF

EAP

MEC

Fiber management

Fiber patch panel shelf

Fiber jumper storage shelf

PP-64-LC/PP2-64-LC or PP-80-LC

FBR-STRG

Optical Transmission Elements

Multiplexer and Demultiplexer Filters

40-wavelength multiplexer, 100-GHz, C band

40-channel demultiplexer, 100-GHz, Odd, C band

40-channel demultiplexer, 100-GHz, Even, C band

40-channel multiplexer/demultiplexer patch panel, 100-GHz, C band – Odd

40-channel multiplexer/demultiplexer patch panel, 100-GHz, C band – Even

Multiplexer/demultiplexer plug-in interleaver module

40-channel exposed faceplate multiplexer/demultiplexer patch panel, 100-GHz, Cband – Odd

40-channel exposed faceplate multiplexer/demultiplexer patch panel, 100-GHz, Cband – Even.

48-channel exposed faceplate multiplexer/demultiplexer patch panel, 100-GHz, Cband – Odd

48-channel exposed faceplate multiplexer/demultiplexer patch panel, 100-GHz, Cband – Even

48-channel 50-GHz de-interleaver with coupler plug-in module

32-wavelength multiplexer, 100-GHz, C band

32-wavelength demultiplexer, 100-GHz, C band

40-MUX-C

40-DMX-C

40-DMX-CE

MD 40 ODD

MD 40 EVEN

MD ID 50

MD 40 ODD

MD 40 EVEN

MD 48 ODD

MD 48 EVEN

MD 48 CM

32MUX-O

32DMX-O

Edge Mounting Bracket

Edge 4-channel bidirectional OADM module

Edge 8-channel coarse wavelength-division multiplexing (CWDM) multiplexer/demultiplexer module

Edge optical service channel add/drop

HD-EXT-PNL

FLD-4-xx.x

FLC-CWDM-8

FLD-OSC

Optical Amplifier

Preamplifier, 50-GHz capable, C band

Booster amplifier, 50-GHz capable, C band

Optical amplifier, 17-dB gain, 50-GHz capable, C band

Enhanced booster amplifier, 50-GHz capable, C band

Enhanced optical amplifier, 20-dBm output power, 50-GHz capable, C band

Raman amplifier, embedded EDFA, C band

Extended performance Raman amplifier, embedded EDFA, C band

True variable-gain booster amplifier, 17-dB gain, 96 channels, C band

True variable-gain booster amplifier, 24-dB gain, 96channels, C band

High-power counterpropagating Raman unit, C band

High-power co-propagating Raman unit, C band

OPT-PRE

OPT-BST

OPT-AMP-17C

OPT-BST-E

OPT-AMP-C

OPT-RAMP-C

OPT-RAMP-CE

OPT-EDFA-17

OPT-EDFA-24

RAMAN-CTP

RAMAN-COP

Reconfigurable Optical Add/Drop Multiplexer

40-channel wavelength cross-connect, 100-GHz, odd, C band

80-channel wavelength cross-connect, 50-GHz, C band

Degree-4 mesh patch panel

Degree-8 mesh patch panel

40-channel wavelength selective switch, 100-GHz, odd, C band

40-channel wavelength selective switch, 100-GHz, even, C band

40-channel single-module ROADM with integrated PRE amplifier, 100-GHz, C band

40-channel single-module ROADM with integrated PRE and BST, 100-GHz, C band

Degree-4 single-module ROADM mesh patch panel

40-WXC-C

80-WXC-C

PP-MESH-4

PP-MESH-8

40-WSS-C

40-WSS-CE

40-SMR1-C

40-SMR2-C

PP-4-SMR

Protection Switching Module

PSM

Optical Channel Add/Drop Multiplexer

4-channel, 100-GHz, C band

AD-4C-xx.x

Optical Service Channel

Standard

Integrated combiner and separator

OSCM

OSC-CSM

Dispersion Compensation

Dispersion compensation unit shelf assembly (2-slot)

Dispersion compensation units (DCUs)

SMF C-band Fiber Bragg Grating Dispersion compensation units (low-latency DCUs)

Tunable DCU coarse granularity C band

Tunable DCU fine granularity C band

DCU-SA

DCU-<value>

FBGDCU-<value>

TDC-CC

TDC-FC

Y-Cable Protection Modules

Shelf assembly

Y-cable protection module, single-mode

Y-cable protection module, multimode

YCBL-LC or FL-SA

YCM-SM-LC or CS-SM-Y

YCM-MM-LC or CS-MM-Y

Wavelength Interfaces

100-Gbps Transponder/Muxponder Units

100G I-4 CP-DQPSK full C band tunable LC metro edge

100G-ME-C

100G I-4 ITU-T CP-DQPSK full C band tunable LC

100G I-4 ITU-T CP-DQPSK full C band tunable LC, Licensed

100G-LC-C

100GC-LIC

Ten 10G multirate client line card

Ten 10G multirate client LC licensed with 1 license at 10GE

10X10G-LC

10X10-LIC

Two 100G CFP line card

CFP-LC

40-Gbps Transponder/Muxponder Units

Four 10-Gbps DPSK muxponder – full C-band tunable

40G CP-DQPSK muxponder, metro edge performance, C band

40G CP-DQPSK muxponder, extended performance, C band

40G CP-DQPSK transponder, metro edge performance, C band

40G CP-DQPSK transponder, extended performance, C band

40G-MXP-C

40ME-MXP-C

40EX-MXP-C

40ME-TXP-C

40EX-TXP-C

10-Gbps Transponder/Muxponder Units

10G multirate transponder, EFEC, full C-band tunable

10-Gbps EFEC multirate transponder, extended performance, full C-band tunable

Four 2.5-Gbps EFEC muxponder, full C-band tunable

Four 2.5-Gbps EFEC muxponder, extended performance, full C-band tunable

10-Gbps EFEC data muxponder, band tunable

10-Gbps EFEC data muxponder, extended performance, full C-band tunable

10E-L1-C

10EX-L1-C

10ME-L1-y

10MEX-L1-C

10DME-C

10DMEX-C

Xponder Units

GE Xponder

GE Xponder, enhanced

10GE Xponder

10GE Xponder, enhanced

OTU2 Xponder

Any Rate Xponder, enhanced

Any Rate Xponder

Any Rate Xponder, software license upgradable

Any Rate Muxponder

Any Rate Muxponder, software license upgradable

GE-XP

GE-XPE

10GE-XP

10GE-XPE

OTU2-XP

AR-XPE

AR-XP

AR-XP-LIC

AR-MXP

AR-MXP-LIC

MSPP-on-a-Blade

ADM-10G

Pluggable Modules

SONET/SDH/OTN

SFP – OC-3 SR1/STM-1 I-1.1 – SM

SFP – OC-3 SR1/STM-1 – MM

SFP – OC-3 IR1/STM-1 S-1.1 – SM

SFP – STM-1 electrical

SFP – OC-12 SR1/STM-4, I-4.1 – SM

SFP – OC-12 IR1/STM-4 S-4.1 – SM

SFP – OC-3 LR2/STM-1 L-1.2 – SM

SFP – OC-48 SR1/STM-16 I-16.1 – SM

SFP – OC-48 IR1/STM-16 S-16.1 – SM

SFP – OC-48 LR2/STM-16 L-16.2 – SM

XFP – OC-192 SR1/STM-64 I-64.1 – SM

XFP – OC-192 IR2/STM-64 S-64.2 – SM

XFP – OC-192 LR2/STM-64 L-64.2 – SM

SFP-E1/DS-1 PDH over FE pseudowire, commercial temp

SFP-E3/DS-3 PDH over FE pseudowire, commercial temp

SFP OC3/STM1/FE OSC for RAMAN application 1518.0nm, SM

CXP – 100GBASE-SR – commercial temp, MM

100G multirate CFP, LR4, commercial temp

40G multirate CFP, LR4, commercial temp

SFP+ SR, commercial temp, MM

SFP+ LR, commercial temp, SM

SFP+ ER, commercial temp, SM

SFP+ ZR, commercial temp, SM

40G multirate CFP, FR, commercial temp

ONS-SE-Z1

ONS-SI-155-SR-MM

ONS-SI-155-I1/ONS-SI-622-I1/SFP3-1-IR/SFP-L.1.1

ONS-SC-155-EL

ONS-SE-Z1

ONS-SI-622-I1/SFP12-4-IR/SFP-L.4.1

ONS-SI-155-L2

ONS-SI-2G-S1/ONS-SE-2G-S1

ONS-SI-2G-I1/ONS-SE-Z1/SFP-OC48-IR/SFP-L.16.1

ONS-SI-2G-L2/ONS-SE-2G-L2

ONS-XC-10G-S1

ONS-XC-10G-I2

ONS-XC-10G-L2

ONS-SC-E1-T1-PW

ONS-SC-E3-T3-PW

ONS-SC-OSC-18.0

ONS-CXP-100G-SR10

ONS-CC-100G-LR4

ONS-CC-40G-LR4

ONS-SC+-10G-SR

ONS-SC+-10G-LR

ONS-SC+-10G-ER

ONS-SC+-10G-ZR

ONS-CC-40G-FR

Ethernet

SFP – FE 10BASE-T, electrical

SFP – FE 100BASE-T, electrical

SFP – FE 100BASE-LX, SM

SFP – FE 100BASE-FX, MM

SFP – GE 1000BASE-T, electrical

SFP – GE 1000BASE-LX, SM

SFP – GE 1000BASE-SX, MM

SFP – GE 1000BASE-ZX, SM

SFP – 1000BASE BX U, GE bidirectional upstream, SM

SFP1000BASE BX D, GE bidirectional downstream, SM

SFP-OC-3/STM-1/FE Optical Service Channel SFPs ULH, commercial temp

XFP – 10GE BASE-LR, SM

XFP – 10GE BASE-LW, SM

XFP – 10GE BASE-ER, SM

XFP – 10GE BASE-EW, SM

XFP – 10GE BASE-ZR, SM

XFP – 10GE BASE-SR, MM

XFP – 10GE BASE-SW, MM

SFP OC-3/STM-1/FE OSC for RAMAN application 1518.0 nm

CXP – 100GBASE-SR, commercial temp, MM

100G multirate CFP, LR4, commercial temp

40G multirate CFP, LR4, commercial temp

SFP+ SR, commercial temp, MM

SFP+ LR, commercial temp, SM

SFP+ ER, commercial temp, SM

SFP+ ZR, commercial temp, SM

100GE Ethernet CFP, LR4, commercial temp

40GE multirate CFP, FR, commercial temp

ONS-SE-ZE-EL

ONS-SE-ZE-EL

SFP3-1-IR/SFP-L.1.1

ONS-SI-155-SR-MM

ONS-SE-ZE-EL

ONS-SE-G2F-LX/ONS-SE-Z1

ONS-SE-G2F-SX

ONS-SE-GE-ZX/ONS-SI-GE-ZX

ONS-SE-GE-BXU

ONS-SE-GE-BXD

ONS-SC-OSC-ULH

ONS-XC-10G-S1

ONS-XC-10G-S1

ONS-XC-10G-I2

ONS-XC-10G-I2

ONS-XC-10G-L2

ONS-XC-10G-SR-MM

ONS-XC-10G-SR-MM

ONS-SC-OSC-18.0

ONS-CXP-100G-SR10

ONS-CC-100G-LR4

ONS-CC-40G-LR4

ONS-SC+-10G-SR

ONS-SC+-10G-LR

ONS-SC+-10G-ER

ONS-SC+-10G-ZR

ONS-CC-100GE-LR4

ONS-CC-40G-FR

SAN

SFP – ESCON 1310, MM

SFP – Sysplex CLO/ETR, 1310 nm, MM

SFP – Fibre Channel 1 G/FICON-1G 100-M5-SN-I

SFP – Fibre Channel 1G/FICON-1G 100-M6-SN-I

SFP – Fibre Channel 1G/FICON-1G 100-SM-LC-L

SFP – Fibre Channel 2G /FICON-2G 200-M5-SN-I

SFP – Fibre Channel 2G/FICON-2G 200-M6-SN-I

SFP – Fibre Channel 2G/FICON-2G 200-SM-LC-L

SFP – Fibre Channel 4G/FICON-4G 400-M5-SN-I

SFP – Fibre Channel 4G/FICON-4G 400-M6-SN-I

SFP – Fibre Channel 4G/FICON-4G 400-SM-LC-L

SFP – ISC-Compat 100-SM-LC-L

SFP – ISC-Peer-1G 100-SM-LC-L

SFP – ISC-Peer-2G 200-SM-LC-L

SFP – Fibre Channel 4G/FICON-4G 100 GHz, LC

XFP – Fibre Channel 10G 1200-SM-LL-L

XFP – Fibre Channel 10G 1200-MX-SN-I

XFP – Fibre Channel 8G SM

XFP – Fibre Channel 8G MM

ONS-SE-200-MM

ONS-SE-200-MM

ONS-SE-G2F-SX

ONS-SE-G2F-SX

ONS-SE-G2F-LX

ONS-SE-G2F-SX

ONS-SE-G2F-SX

ONS-SE-G2F-LX

ONS-SE-4G-MM

ONS-SE-4G-MM

ONS-SE-4G-SM

ONS-SE-G2F-LX

ONS-SE-G2F-LX

ONS-SE-G2F-LX

ONS-SC-4G-xx.x

ONS-XC-10G-S1

ONS-XC-10G-SR-MM

ONS-XC-8G-SM

ONS-XC-8G-MM

Video

SFP – D1 Video 1310, SM

SFP – DVB-ASI 1310, SM

SFP – SDI 1310, SM

SFP – HDTV 1310, SM

SFP – DV6000 1310, SM

SFP – 3G HD Video Tx, SM

SFP – 3G HD Video Rx, SM

ONS-SI-622-I1/SFP12-4-IR/SFP-L.4.1

ONS-SI-622-I1/SFP12-4-IR/SFP-L.4.1

ONS-SI-622-I1/SFP12-4-IR/SFP-L.4.1

ONS-SE-G2F-LX

ONS-SI-2G-I1/SFP-OC48-IR/SFP-L.16.1

ONS-SC-HD3GV-TX

ONS-SC-HD3GV-RX

Data

SFP – FDDI 1310, SM

SFP – T3 Optical 1310, SM

ONS-SI-155-I1/SFP3-1-IR/SFP-L.1.1

ONS-SI-155-I1/SFP3-1-IR

PDHoEthernet

SFP – E1/DS1 PDH over FE pseudowire

SFP – FE over DS1/E1

SFP – FE over DS-3/E3

SFP – E3/DS-3 PDH over FE pseudowire

SFP – E1/DS1 PDH over FE Pseudowire

SFP – FE over DS1/E1

SFP – FE over DS3/E3

SFP – E3/DS-3 PDH over FE Pseudowire

xWDM

SFP – OC-48 CWDM, SFP – OC-48 DWDM, 100 GHz

SFP – STM-16 CWDM

SFP – STM-16 DWDM, 100 GHz

SFP – GE CWDM

SFP – GE DWDM, 100 GHz

SFP – Fibre Channel 1G/FICON-1G CWDM

SFP – Fibre Channel 1G/FICON-1G DWDM, 100GHz

SFP – Fibre Channel 2G/FICON-2G CWDM

SFP – Fibre Channel 2G/FICON-2G DWDM, 100 GHz, 15xx.x nm SFP – Fibre Channel 4G/FICON-4G 100 GHz, LC

XFP – OC-192 DWDM, 100 GHz

XFP – STM-64 DWDM, 100 GHz

XFP – 10GE LAN PHY DWDM, 100 GHz

XFP – 10GE FC DWDM, 100 GHz

XFP – 10GE multirate full C-band tunable DWDM, 50 GHz

XFP – OC-192/10GE/I2, CWDMC-temp, 40-km range

10GE MR, SFP+ 15xx.x nm, 100 GHz, LC, SM

10GE MR, edge performance SFP+ 100 GHz, LC, SM

X–P – 10GE 96-channel full C-band tunable DWDM XFP, 50 GHz, LC, SM

ONS-SC-Z3-xxxx

ONS-SC-2G-xx.x

ONS-SC-Z3-xxxx

ONS-SC-2G-xx.x

ONS-SC-Z3-xxxx

ONS-SC-2G-xx.x

ONS-SC-Z3-xxxx

ONS-SC-2G-xx.x

ONS-SC-Z3-xxxx

ONS-SC-2G-xx.x

ONS-SC-4G-xx.x

ONS-XC-10G-xx.x, ONS-XC-10g-EPxx.x

ONS-XC-10G-xx.x, ONS-XC-10g-EPxx.x

ONS-XC-10G-xx.x, ONS-XC-10g-EPxx.x

ONS-XC-10G-xx.x, ONS-XC-10g-EPxx.x

ONS-XC-10G-C

ONS-XC-10G-xxxx

ONS-SC+-10G-xx.x

ONS-SC+-10GEPxx.x

ONS-XC-10G-96C

Table 2 provides details about supported interfaces and protection types for the different wavelength interface modules supported by the Cisco ONS 15454 MSTP.

Table 2. Wavelength Interfaces Details

Modules

Supported Service Interfaces

Protection Supported

2.5-Gbps FEC Multirate Transponder Cards

8 modules, 4-channel tunable for 32-channel, 100-GHz plan, 50-GHz laser stability (C band)

1-Gbps Fibre Channel/FICON

2-Gbps Fibre Channel/FICON

ISC-1

ISC-3

ESCON

Fast Ethernet (FE)

Gigabit Ethernet (GE)

T3 (optical)

OC-3/STM-1

OC-12/STM-4

OC-48/STM-16

D1-SDI video

HDTV

C-Cor DV-6000 (2.38-Gbps)

ETR/CLO

No protection

Optical-path protection

Optical-path and equipment protection

2.5-Gbps Data Muxponder Cards

8 modules, 4-channel tunable for 32-channel, 100-GHz plan, 50-GHz laser stability (C band)

1-Gbps Fibre Channel/FICON

2-Gbps Fibre Channel/FICON

ESCON

GE

No protection

Optical-path protection

Optical-path and equipment protection

10-Gbps EFEC Multirate Transponder Cards
(4-channel tunable)

8 modules, 4-channel tunable for 32-channel, 100-GHz plan, 50-GHz laser stability (C band)

10GE LAN

10GE WAN

OC-192/STM-64

10 Gigabit Fibre Channel

No protection

Optical-path and equipment protection

Four 2.5-Gbps EFEC Muxponder Cards
(4-channel tunable)

8 modules, 4-channel tunable for 32-channel, 100-GHz plan, 50-GHz laser stability (C band)

OC-48/STM-16

No protection

Optical-path and equipment protection

10-Gbps EFEC Multirate Transponder Cards
(full-band tunable)

1 module, full-band tunable for 82-channel, 50-GHz plan and stability (C band)

1 module, full-band tunable for 82-channel, MLSE, 50-GHz plan and stability (Cband)

10GE LAN

10GE WAN

OC-192/STM-64

10 Gigabit Fibre Channel/FICON

No protection

Optical-path and equipment protection

4-Port 2.5-Gbps Full-Band Tunable Enhanced Muxponder Cards
(full-band tunable)

1 module, full-band tunable for 82-channel, 50-GHz plan and stability (C band)

1 module, full-band tunable for 82-channel, MLSE, 50-GHz plan and stability (Cband)

OC-48/STM-16

No protection

Optical-path and equipment protection

10-Gbps EFEC Data Muxponder Cards
(full-band tunable)

1 module, full-band tunable for 82-channel, 50-GHz plan and stability (C band)

1 module, full-band tunable for 82-channel, MLSE, 50-GHz plan and stability (Cband)

1-Gbps Fibre Channel/FICON

2-Gbps Fibre Channel/FICON

4-Gbps Fibre Channel/FICON

ISC-1

ISC-3

GE

No protection

Optical-path and equipment protection

GE Xponder Units

1 module, Standard version, two DWDM XFP-based trunks

1 module, Enhanced version, two DWDM XFP-based trunks

E1/T1/DS1 (Enhanced version)

E3/T3/DS3 (Enhanced version)

FE (Enhanced version)

GE

10GE LAN

No protection

Optical-path protection

Layer 2 Ethernet protection (GR3)

10GE Xponder Units

1 module, Standard version, two DWDM XFP-based trunks

1 module, Enhanced version, two DWDM XFP-based trunks

10GE LAN

No protection

Optical-path protection

Layer 2 Ethernet protection (GR3)

OTU2 Xponder

1 module, DWDM XFP-based trunk

10GE LAN

10GE WAN

OC-192/STM-64

10 Gigabit Fibre Channel/ION

OTU2

No protection

Optical-path protection

Optical-path and equipment protection

4-Port 10-Gbps Full-Band Tunable DQPSK Muxponder Card
(full-band tunable)

1 module, full-band tunable for 82-channel, 50-GHz plan and stability (C band)

8 Gigabit Fibre Channel OC-192/STM-64/10GE WAN-PHY

10GE LAN-PHY

OTU2 (OC-192/STM-64/10GE WAN-PHY)

10GE-FC

OTU2e (10GE LAN-PHY)

No protection

Optical-path and equipment protection

40-Gbps CP-DQPSK Muxponder Card

1 module, Metro Edge Performance version, full-band tunable for 82-channel,
50-GHz plan and stability (C band)

1 module, Extended Performance version, full-band tunable for 82-channel,
50-GHz plan and stability (C band)

8 Gigabit Fibre Channel OC-192/STM-64/10GE WAN-PHY

10GE LAN-PHY

OTU2 (OC-192/STM-64/10GE WAN-PHY)

10GE-FC

OTU2e (10GE LAN-PHY)

No protection

Optical-path and equipment protection

40-Gbps CP-DQPSK Transponder Card

1 module, Metro Edge Performance version, full-band tunable for 82-channel,
50-GHz plan and stability (C band)

1 module, Extended Performance version, full-band tunable for 82-channel,
50-GHz plan and stability (C band)

OTU3

OC-768/STM256

40GE CBR

No protection

Optical-path and equipment protection

Any Rate Xponder and Muxponder Cards

3 modules, DWDM XFP-based trunk

STM-1/OC-3

STM-4/OC-12

STM-16/OC-48

OTU-1

OTU-2

Fast Ethernet (FE)

Gigabit Ethernet (GE)

Enterprise Systems Connection (ESCON)

1 Gigabit Fibre Channel or fiber connectivity (FICON)

2 Gigabit Fibre Channel or FICON

4 Gigabit Fibre Channel or FICON

8 Gigabit Fibre Channel or FICON

SD-SDI (270 Mbps)

HD-SDI (1.485 Gbps)

Third-generation SDI (3G-SDI) (2.970 Gbps)

No protection

Optical-path and equipment protection

100-Gbps CP-DQPSK Transponder Card

1 module, Metro Edge Performance version, full-band tunable for 96-channel,
50-GHz plan and stability (C band)

1 module, Extended Performance version, full-band tunable for 96-channel,
50-GHz plan and stability (C band)

1 module, Extended Performance version, full-band tunable for 96-channel,
50-GHz plan and stability (C band), software license upgradable

100GE

No protection

Ten 10GE Transponder/Muxponder Card

1 module, ten 10GE client card with 100-Gbps CP-DQPSK transponder card as peer, and configurable as five 10GE transponder cards with SFP+ based trunk

1 module, ten 10GE client card with 100-Gbps CP-DQPSK transponder card as peer, software license upgradable

10GE LAN-PHY

10GE WAN-PHY

OTU-2

STM-64/OC-192

8 Gigabit Fibre Channel or FICON

10 Gigabit Fibre Channel or FICON

No protection

Two CFP Transponder/Muxponder Client Card

1 module, two 40GE/100GE client cards with 100-Gbps CP-DQPSK transponder card as peer

OTU4

100GE

OTU3

40GE

No protection


Table 3 provides details about wavelengths supported for the different wavelength plans in C band, and Table 4 provides product specifications for the Cisco ONS 15454 MSTP.

Table 3. C-Band Wavelength Plan

Wavelength

32 Channels

40 Channels

48 Channels

64 Channels

80 Channels

96 Channels

(nm)

Odd

Even

Odd

Even

Odd

Even

50 GHz

50 GHz

1528.7

x

x

1529.1

x

x

1529.5

x

x

1529.9

x

x

1530.3

x

x

x

x

x

x

1530.7

x

x

x

x

x

x

1531.1

x

x

x

x

x

x

1531.5

x

x

x

x

x

x

1531.9

x

x

x

x

x

x

1532.2

x

x

x

x

x

x

1532.6

x

x

x

x

x

x

1533.0

x

x

x

x

x

x

1533.4

x

x

x

x

1533.8

x

x

x

x

1534.2

x

x

x

x

x

x

1534.6

x

x

x

x

x

x

1535.0

x

x

x

x

x

x

1535.4

x

x

x

x

x

x

1535.8

x

x

x

x

x

x

1536.2

x

x

x

x

x

x

1536.6

x

x

x

x

x

x

1537.0

x

x

x

x

x

x

1537.4

x

x

x

x

1537.7

x

x

x

x

1538.1

x

x

x

x

x

x

1538.5

x

x

x

x

x

x

1538.9

x

x

x

x

x

x

1539.3

x

x

x

x

x

x

1539.7

x

x

x

x

x

x

1540.1

x

x

x

x

x

x

1540.5

x

x

x

x

x

x

1540.9

x

x

x

x

x

x

1541.3

x

x

x

x

1541.7

x

x

x

x

1542.1

x

x

x

x

x

x

1542.5

x

x

x

x

x

x

1542.9

x

x

x

x

x

x

1543.3

x

x

x

x

x

x

1543.7

x

x

x

x

x

x

1544.1

x

x

x

x

x

x

1544.5

x

x

x

x

x

x

1544.9

x

x

x

x

x

x

1545.3

x

x

x

x

1545.7

x

x

x

x

1546.1

x

x

x

x

x

x

1546.5

x

x

x

x

x

x

1546.9

x

x

x

x

x

x

1547.3

x

x

x

x

x

x

1547.7

x

x

x

x

x

x

1548.1

x

x

x

x

x

x

1548.5

x

x

x

x

x

x

1548.9

x

x

x

x

x

x

1549.3

x

x

x

x

1549.7

x

x

x

x

1550.1

x

x

x

x

x

x

1550.5

x

x

x

x

x

x

1550.9

x

x

x

x

x

x

1551.3

x

x

x

x

x

x

1551.7

x

x

x

x

x

x

1552.1

x

x

x

x

x

x

1552.5

x

x

x

x

x

x

1552.9

x

x

x

x

x

x

1553.3

x

x

x

x

1553.7

x

x

x

x

1554.1

x

x

x

x

x

x

1554.5

x

x

x

x

x

x

1554.9

x

x

x

x

x

x

1555.3

x

x

x

x

x

x

1555.7

x

x

x

x

x

x

1556.1

x

x

x

x

x

x

1556.5

x

x

x

x

x

x

1556.9

x

x

x

x

x

x

1557.3

x

x

x

x

1557.7

x

x

x

x

1558.1

x

x

x

x

x

x

1558.5

x

x

x

x

x

x

1558.9

x

x

x

x

x

x

1559.3

x

x

x

x

x

x

1559.7

x

x

x

x

x

x

1560.2

x

x

x

x

x

x

1560.6

x

x

x

x

x

x

1561.0

x

x

x

x

x

x

1561.4

x

x

x

x

1561.8

x

x

x

x

1562.2

x

x

1562.6

x

x

1563.0

x

x

1563.4

x

x

1563.8

x

x

1564.2

x

x

1564.6

x

x

1565.0

x

x

1565.5

x

x

1565.9

x

x

1566.3

x

x

1566.7

x

Table 4. Product Specifications

Item

Specification

Wavelengths

C band

96 + 1 (OSC) (with 50-GHz channels spacing)

Wavelength spacing

100 or 50 GHz

Optical Reach, Single Span, Point-to-Point (amplified)

80 channels

40 channels

20 channels

222 km

236 km

250 km

Number of spans

40

Ring circumference

> 4000 km

Fiber type

Single-mode fiber (G.652, G.653 G.655, and G.656)

Power Requirements

M12 fan-tray assembly

M12 DC power

M6 fan-tray assembly, FTA2

M6 AC2 power module

M6 AC power module

M6 DC power module

M6 DC20 power module

M2 fan-tray assembly

M2 AC power module

M2 DC power module

Maximum

55W

1152W

120W, 130W

1500W

900W

1350W

960W

40W

350W

450W

Physical Dimensions

M12 ANSI shelf assembly

Rack mounting

Shelf assembly (H x W x D)

19- or 23-in. (483- or 584-mm) EIA rack-mounting

18.5 x 17.6 x 12.0 in. (469.9 x 447.04 x 304.8 mm)

M12 ETSI shelf assembly (H x W x D)

Rack mounting

Shelf assembly (H x W x D)

23-in. (600 mm) or 19-in. (483-mm) rack-mounting1

24.3 x 17.5 x 11.02 in. (616.5 x 445 x 280 mm)

M6

Rack mounting

M6 shelf assembly (H x W x D)

19- or 23-in. (483- or 584-mm) EIA rack mounting
19-in. (483-mm) rack mounting or 21-in. (533-mm) cabinet mounting

10.45 x 17.45 x 11.02 in. (265.4 x 443.3 x 280 mm)

M2

Rack mounting

M2 shelf assembly (H x W x D)

19- or 23-in. (483- or 584-mm, respectively) EIA rack-mounting
19-in. (83-mm) rack-mounting or 21-in. (533-mm) cabinet mounting

3.46 x 17.18 x 11.02 in. (87.9 x 436.4 x 280 mm)

Environmental Conditions

Storage temperature

–40 to 158ºF (–40 to 70ºC)

Operating temperature

Normal

Short-term2

32 to 131ºF (0 to 55ºC)

23 to 131ºF (–5 to 55ºC)

Relative humidity

Normal

Short-term2

5 to 85%, noncondensing

5 to 90% but not to exceed 0.024 kg water/kg of dry air

1. 19-inch mounting brackets must be ordered separately.

2. Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This timeframe refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period.)

Regulatory Standards Compliance

Table 5 summarizes regulatory standard compliance and agency approvals, and Table 6 provides a list of standards that are applicable to Cisco ONS 15454 MSTP but for which compliance may be applicable to selected sections only.

Table 5. Regulatory Standard Compliance and Agency Approvals

ANSI (15454) System

ETSI (15454E) System

Supported Countries

Canada
United States
Korea
Europe
Latin America
Japan
Asia Pacific
Middle East and Africa

EMC (Class A)

ICES-003 Issue 4 (2004)
GR-1089-CORE, Issue 4
(Type 2 and Type 4 equipment)
GR-1089-CORE – Issue 03 (Oct 2002)
(Objective O3-2 – Section 3.2.1 – Radiated Emissions requirements with all doors open)
FCC 47CFR15, Class A subpart B (2006)
EN 300 386 v1.3.3 (2005) and v1.4.1 (2007)
CISPR 22 – Fifth edition (2005-04) Class A and the amendment 1 (2005-07)
CISPR 24 – First edition (1997-09) and amendment 1 (2001-07) and amendment 2 (2002-10).
EN 55022:1998 Class A – CENELEC Amendment A2:2003
EN 55024:1998 – CENELEC Amendment A1:2001 and Amendment A2:2003
Resolution 237 (Brazil)
VCCI V-3/2006.04
EN 61000-6-1:2001
EN 61000-6-2:1999

Safety

UL/CSA60950-1First Edition (2003)
GR-1089-CORE, Issue 4
(Type 2 and Type 4 equipment)
UL/CSA 60950 -1 First Edition (2003)
IEC 60950-1 (2001/10)/Amendment 11:2004 to EN 60950- 1:2001, 1st Edition (with all country deviations)

Environmental

GR-63-CORE,Issue 3 (2006)
ETS 300-019-2-1 V2.1.2 (Storage, Class 1.1)
ETS 300-019-2-2 V2.1.2 (Transportation, Class 2.3)
ETS 300-019-2-3 V2.1.2 (Operational, Class 3.1E)
EU WEEE regulation
EU RoHS regulation

Power and Grounding

GR-1089-CORE,Issue4
ETS 300 132-2

Optical Safety

EN or IEC-60825-2 Third edition (2004-06)
EN or IEC 60825-1 Consol. Ed. 1.2 – incl. am1+am2 (2001-08)
21CFR1040 (2004/04) (Accession Letter and CDRH Report)
IEC-60825-2 Third edition (2004-06)
ITU-T G.664 (2006)

Miscellaneous

Acoustic noise

GR-63-CORE,Issue 3 (2006)

ETS 300 753 ed.1 (1997-10)

Rain, sand, dust and moisture proofing

AS 1939-1990, 4.2, IP 53

Mechanical shock and bumps

AS1099- 2.27

Customer specific requirements

AT&T Network Equipment Development Standards (NEDS) Generic Requirements, AT&T 802-900-260

SBC TP76200MP

Verizon SIT.NEBS.NPI.2002.010

Table 6. Standards Applicable to Cisco ONS 15454 MSTP

Standard

Title

Optical Fiber

ITU-T G.652 (A, B, C, D)

ITU-T G.653

ITU-T G.654

ITU-T G.655

ITU-T G.656

Characteristics of a single-mode optical fiber and cable

Characteristics of a dispersion-shifted single-mode optical fiber and cable

Characteristics of a cut-off shifted single-mode optical fiber and cable

Characteristics of a nonzero dispersion-shifted single-mode optical fiber and cable

Characteristics of a fiber and cable with nonzero dispersion for wideband optical transport

Optical Systems

ITU-T G.691

ITU-T G.692

ITU-T G.693

ITU-T G.694.1

ITU-T G.694.2

ITU-T G.695

ITU-T G.697

Telcordia GR-253-CORE – Issue 04

Optical interfaces for single-channel STM-64 and other SDH systems with optical amplifiers

Optical interfaces for multichannel systems with optical amplifiers

Optical interfaces for intraoffice systems

Spectral grids for WDM applications: DWDM frequency grid

Spectral grids for WDM applications: CWDM wavelength grid

Optical interfaces for coarse wavelength division multiplexing applications

Optical monitoring for DWDM systems

SONET Transport Systems: Common Generic Criteria

Optical Amplifiers

ITU-T G.661

ITU-T G.662

ITU-T G.663

ITU-T G.665

Definition and test methods for the relevant generic parameters of optical amplifier devices and subsystems

Generic characteristics of optical amplifier devices and subsystems

Application-related aspects of optical amplifier devices and subsystems

Generic characteristics of Raman amplifiers and Raman amplified subsystems

Performance Monitoring and Management Interface

ITU-T G.826

ITU-T G.829

ITU-T G.874

Telcordia GR-253-CORE – Issue 04

Telcordia GR-474-CORE

Telcordia GR-2998-CORE

End-to-end error performance parameters and objectives for international, constant bit-rate digital paths and connections

Error performance events for SDH multiplex and regenerator sections

Management aspects of the optical transport network element

Synchronous Optical Network (SONET) Transport Systems: Common Generic Criteria

Alarm and Control for Network Elements

Generic Requirements for WDM EMSs

Ethernet

IEEE 802.1D

IEEE 802.1Q

IEEE 802.1ad

IEEE 802.3ab

IEEE 802.3ae

MEF 9

MEF 14

ITU-T Y.1731

IEEE Standard for local and metropolitan area networks – Media access control (MAC) Bridges

IEEE Standard for Local and Metropolitan Area Networks – Virtual Bridged Local Area Networks

Amendment to IEEE 802.1Q-2005. IEEE Standard for Local and Metropolitan Area Networks — Virtual Bridged Local Area Networks

1000BASE-T Gbps Ethernet over twisted pair at 1 Gbps (125 MBps)

10 Gbps (1,250 MBps) Ethernet over fiber; 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-SW, 10GBASE-LW, 10GBASE-EW

Abstract Test Suite for Ethernet Services at the UNI

Abstract Test Suite for Traffic Management Phase 1

OAM functions and mechanisms for Ethernet based networks

SONET, SDH and OTN

ITU-T G.707

ITU-T G.709

ITU-T G.781

ITU-T G.783

ITU-T G.784

ITU-T G.798

ITU-T G.805

ITU-T G.811

ITU-T G.812

ITU-T G.813

ITU-T G.823

ITU-T G.824

ITU-T G.825

ITU-T G.8251

ITU-T G.841

ITU-T G.872

ITU-T G.957

ITU-T G.959.1

ITU-T G.Sup43

ITU-T G.7041

ANSI T1.105

Network node interface for the synchronous digital hierarchy (SDH)

Interfaces for the Optical Transport Network (OTN)

Synchronization layer functions

Characteristics of SDH equipment functional blocks

SDH management

Characteristics of optical transport network hierarchy equipment functional blocks

Generic functional architecture of transport networks

Timing characteristics of primary reference clocks

Timing requirements of slave clocks suitable for use as node clocks in synchronization networks

Timing characteristics of SDH equipment slave clocks (SEC)

Control of jitter and wander within digital networks which are based on the 2048 Kbps hierarchy

Control of jitter and wander within digital networks which are based on the 1544 Kbps hierarchy

Control of jitter and wander within digital networks which are based on the SDH

Control of jitter and wander within the OTN

Types and characteristics of SDH network protection architectures

Architecture of optical transport networks

Optical interfaces for equipment and systems relating to the synchronous digital hierarchy

Optical transport network physical layer interfaces

Transport of IEEE 10GBASE-R in OTNs

Generic framing procedure (GFP)

SONET – Basic Description including Multiplex Structure, Rates, and Formats


Ordering Information

To place an order, visit the Cisco Ordering homepage. To download software, visit the Cisco Software Center.

Table 7 provides ordering information.

Table 7. Ordering Information

Product ID

Description

Common Equipment – M12

15454-SA-HD=

15454-SA-HD-DDR3=

15454E-SA-ETSI=

Shelf assembly, Cisco ONS 15454

Shelf assembly, Cisco ONS 15454 with Deep Door

Shelf assembly, Cisco ONS 15454E for ETSI applications

15454-TCC2P-K9=

15454E-TCC2P-K9=

Timing, Communications, and Control Card, Version 2 Plus (TCC2P), 15454 chassis

Timing, Communications, and Control Card, Version 2 Plus (TCC2P), 15454E chassis

15454-TCC3-K9=

15454E-TCC3-K9=

Timing, Communications, and Control Card, Version 3 (TCC3), I-Temp, 15454 chassis

Timing, Communications, and Control Card, Version 3 (TCC3), I-Temp, 15454E chassis

15454-CC-FTA=

15454E-CC-FTA=

Controlled cooling fan-tray assembly, includes fan-tray filter

15454E-CTP-MIC48V=

Mechanical interface card, craft, timing, and power inputs, ETSI

15454E-AP-MIC48V=

Mechanical interface card, alarm, and power inputs, ETSI

15454-AIR-RAMP=

15454E-AIR-RAMP=

Air ramp (ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets

15454-AIC-I=

15454E-AIC-I=

Alarm Interface Controller, international card

15454-BLANK=

15454E-BLANK=

Shelf slot-filler panel, fits any slot in Cisco ONS 15454 ANSI shelf assembly

Shelf slot-filler panel, fits any slot in Cisco ONS 15454 ETSI shelf assembly

15454E-BLANK-FMEC=

Shelf FMEC slot-filler panel, fits Cisco ONS 15454 ETSI shelf assembly

15454-MS-ISC-100T=

Integrated 100T Ethernet switch for multishelf management

15454-EAP-MF=

Mechanical frame for Ethernet adapter panel (ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets). Ships with 2x RJ-45/RJ-45 cables (0.15m) to connect MS-ISC units with the TCC2P units and with 1x RJ-45/RJ-45 cable (0.5m) to connect the MS-ISC units among themselves.

15454-EAP=

Ethernet adapter panel (to be used with MS-ISC-100T to allow proper cable management)

15454-MEC=

Multiple Ethernet cable to replicate the MS-ISC-100T Ethernet ports on the EAP unit

Common Equipment – M6

15454-M6-SA=

6-service-slot MSTP shelf, includes M-SHIPKIT, M6-FTF and brackets for 19”, 21” and 23”

15454-M6-FTA=

15454-M6-FTA2=

6-service-slot MSTP chassis fan tray

6-service-slot MSTP chassis 2nd gen fan tray

15454-M6-LCD=

6-service-slot MSTP chassis LCD with backup memory

15454-M6-ECU=

6-service-slot MSTP chassis external cable connections

15454-M6-ECU2=

6 service slot MSTP external connection unit with TOD/PPS

15454-M6-ECU-60=

6 slot MSTP external connection unit with TOD/PPS with -60V rating

15454-M6-DC=

15454-M6-DC20=

6-service-slot MSTP chassis 40A DC power filter

6-service-slot MSTP chassis 20A DC power filter

15454-M6-AC=

6-service-slot MSTP chassis AC power supply

15454-M6-AC2=

6 service slot MSTP chassis 2nd gen AC power supply

15454-M6-DEFL21=

Air Deflectors for 21” ETSI cabinet installations

15454-M6-DEFL23=

Air Deflectors for 23” rack installations

15454-M6-BRKT=

Spare brackets for 19”, 21” and 23”

15454-M6-PWRFLR=

6-service-slot MSTP power filter filler card

15454-M6-FTF=

6-service-slot MSTP chassis fan tray filter

15454-M6-DR=

15454-M6-DDR=

6-service-slot MSTP chassis door

6-service-slot MSTP chassis deep door

Common Equipment – M2

15454-M2-SA=

2-service-slot MSTP shelf, includes M-SHIPKIT, M2-FTF and brackets for 19”, 21” and 23”

15454-M2-FTA=

15454-M2-FTA2=

2-service-slot MSTP chassis fan tray

2-service-slot MSTP chassis 2nd gen fan tray

15454-M2-DC=

2-service-slot MSTP chassis DC ANSI filter with memory

15454-M2-DC-E=

2-service-slot MSTP chassis DC ETSI filter with memory

15454-M2-AC=

2-service-slot MSTP chassis AC power supply with memory

15454-M2-DEFL21=

Air Deflectors for 21” ETSI cabinet installations

15454-M2-DEFL23=

Air Deflectors for 23” rack installations

15454-M2-BRKT=

Spare brackets for 19”, 21” and 23”

15454-M2-WM=

2-service-slot MSTP chassis wall mount bracket

15454-M2-FTF=

2-service-slot MSTP chassis air filter

15454-M2-DR=

15454-M2-DDR=

2-service-slot MSTP chassis door

2-service-slot MSTP chassis deep door

Common Equipment – M6 and M2

15454-M-TNC-K9=

Transport Node Controller for M2 and M6 chassis

15454-M-TSC-K9=

Transport Shelf Controller for M2 and M6 chassis

15454-M-TNCE-K9=

Transport Node Controller Ethernet PTP for M2, M6 Chassis

15454-M-TSCE-K9=

Transport Shelf Controller Ethernet PTP for M2, M6 Chassis

15454-M-T-FILLER=

Detectable control slot filler card

15454-M-FILLER=

Detectable line slot filler card

15454-M-SHIPKIT=

Shipkit, Cisco ONS 15454 M6 and Cisco ONS 15454 M2

Cables – M6 and M2

Description

Length

Gauge

Connector 1

Connector 2

15454-M-120TMGCBL(=)

BITS IN/OUT cable for ANSI

0.6 m

COAX 23 AWG

DIN 1.0/2.3

2 WIRE WRAP PINS

15454-M2-DCCBL-LE(=)

DC power cable for ETSI left exit

10 m

12 AWG

Power D-Sub 2 poles

none

15454-M6-DCCBL-LE(=)

DC power cable for ETSI left exit

10 m

8 AWG

Power D-Sub 3 poles

none

15454-M6-DCCBL-RE(=)

DC power cable for ETSI right exit

10 m

8 AWG

Power D-Sub 3 poles

none

15454-M-ACCBL-L(=)

AC power cable ANSI 110 Vac left exit

3 m

15A – 125V

C13

NEMA 5-15P

15454-M-ACCBL-L2(=)

AC power cable ANSI 220 Vac left exit

3 m

15A – 250V

C13

NEMA 6-15P

15454-M-ACCBL-R(=)

AC power cable ANSI 110 Vac right exit

3 m

15A – 125V

C13

NEMA 5-15P

15454-M-ACCBL-R2(=)

AC power cable ANSI 220 Vac right exit

3 m

15A – 250V

C13

NEMA 6-15P

15454-M-ACL6-L(=)

AC power cable for Data Center

3 m

15A – 250V

C13

NEMA WD 6 L6-20P

15454-M-ACL6-R(=)

AC power cable for Data Center

3 m

15A – 250V

C13

NEMA WD 6 L6-20P

15454-M-ALMCBL(=)

15454-M-ALMCBL2(=)

SCSI Alarm cable

SCSI Alarm cable limited to 8 inputs

20 m

20 m

28 AWG

24 AWG

Mini SCSI

Mini SCSI

None

None

15454-M-CBL-LARG(=)

AC power cable – ARG left exit

3 m

10A – 250V

C13

IRAM 2073 – IEC 60884-1

15454-M-CBL-LAUS(=)

AC power cable – AUS left exit

3 m

10A – 250V

C13

AS/NZS 3112: 2000

15454-M-CBL-L-CHI(=)

AC power cable – China left exit

3 m

10A – 250V

C13

GB2099.1/GB1002

15454-M-CBL-L-EU(=)

AC power cable – EU left exit

3 m

10A – 250V

C13

CEE 7 STANDARD SHEET VII

15454-M-CBL-L-IND(=)

AC power cable – India left exit

3 m

10A – 250V

C13

IS 1293

15454-M-CBL-L-JPN(=)

AC power cable – Japan left exit

3 m

15A – 125V

C13

JIS C8303 & JIS C8306

15454-M-CBL-LKOR(=)

AC power cable – KOR left exit

3 m

10A – 250V

C13

K60884-01

15454-M-CBL-L-UK(=)

AC power cable – UK left exit

3 m

10A – 250V

C13

BS 1363/A & SS145/A

15454-M-CBL-RARG(=)

AC power cable – ARG right exit

3 m

10A – 250V

C13

IRAM 2073 – IEC 60884-1

15454-M-CBL-RAUS(=)

AC power cable – AUS right exit

3 m

10A – 250V

C13

AS/NZS 3112: 2000

15454-M-CBL-R-CHI(=)

AC power cable – China right exit

3 m

10A – 250V

C13

GB2099.1/GB1002

15454-M-CBL-R-EU(=)

AC power cable – EU right exit

3 m

10A – 250V

C13

CEE 7 STANDARD SHEET VII

15454-M-CBL-R-IND(=)

AC power cable – India right exit

3 m

10A – 250V

C13

IS 1293

15454-M-CBL-R-JPN(=)

AC power cable – Japan right exit

3 m

15A – 125V

C13

JIS C8303 & JIS C8306

15454-M-CBL-RKOR(=)

AC power cable – KOR right exit

3 m

10A – 250V

C13

K60884-01

15454-M-CBL-R-UK(=)

AC power cable – UK right exit

3 m

10A – 250V

C13

BS 1363/A & SS145/A

15454-M-TMGCBL(=)

BITS IN/OUT cable for ETSI

20 m

COAX 23 AWG

DIN 1.0/2.3

none

15454-M-USBCBL(=)

USB cable for passive devices

3 m

28#/1P + 24#/2C + AEB

USB “A” MALE

USB “A” MALE

Common Equipment

15454-PP-64-LC=

64-port fiber patch-panel shelf, 1 rack unit (1RU) high, LC-to-LC connectors, 32 duplex LC adapters, supports up to 8 multifiber cable assemblies (1 MPO to 8x LC), includes 2 MPO to 8x LC 2.3-meter cable assemblies (uninstalled). Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets.

15454-PP-80-LC=

80-port fiber patch-panel shelf, 2RU high, LC-to-LC connectors, 40 duplex LC adapters, includes 10 MPO to 8x LC 2.3-meter cable assemblies (pre-cabled). Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets.

15454-PP-MESH-4=

Degree-4 mesh patch panel, 2RU high, 1x LC and 1x MPO adapter per direction. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets.

15454-PP-MESH-8=

Degree-8 mesh patch panel, 2RU high, 1x LC and 1x MPO adapter per direction. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets.

15454-PP-4-SMR=

Degree-4 mesh patch panel for single-mode ROADM, 1RU high, 1x MPO adapter per direction. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets.

15454-FBR-STRG=

Fiber-storage shelf, supports eight 2-meter ribbon cables (8-fiber) plus 40 2-meter 2-mm fiber cables. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets.

15216-FL-SA=

FlexLayer shelf assembly, 4 module slots, 1 RU high, Cisco FlexLayer platform. Ships with ANSI 19-in. and 23-in. mounting brackets.

15216-CS-SM-Y=

Y-cable splitter/combiner module for 2 wavelengths protection, single-mode fiber, single-width module, installs in Cisco FlexLayer (15216-FL-SA=) shelf assembly

15216-CS-MM-Y=

Y-cable splitter/combiner module for 2 wavelengths protection, multimode fiber, single-width module, installs in Cisco FlexLayer (15216-FL-SA=) shelf assembly

15454-YCBL-LC=

Y-cable storage shelf, 2 RUs high, supports up to 8 Y-cable splitter/combiner modules. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets.

15454-YCM-SM-LC=

Y-cable splitter/combiner module for 1 wavelength protection, single-mode fiber, LC adapters, installs in Cisco Y-cable storage (15454-YCBL-LC=) shelf assembly

15454-YCM-MM-LC=

Y-cable splitter/combiner module for 1 wavelength protection, multimode fiber, LC adapters, installs in Cisco Y-cable storage (15454-YCBL-LC=) shelf assembly

Service Interfaces[1]

15454-10DME-C=

10-Gbps E-FEC data muxponder card, 8x SFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors

15454-10DMEX-C=

10-Gbps E-FEC data muxponder card, 8x SFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors. Extended version of 15454-10DME-C= leveraging on 2nd Generation Maximum Likelihood Sequence Estimation (MLSE)

15454-10E-L1-C=

10-Gbps E-FEC multirate transponder card, 1x XFP-based client interface, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors

15454-10EX-L1-C=

10-Gbps E-FEC multirate transponder card, 1x XFP-based client interface, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors. Extended version of 15454-10E-L1-C= leveraging on 2nd Generation MLSE

15454-10GE-XP=

10GE E-FEC Ethernet Crossponder, 2x XFP-based client interfaces, 2x XFP-based trunk interfaces

15454-10GE-XPE=

10GE E-FEC Ethernet Enhanced Crossponder, 2x XFP-based client interfaces, 2x XFP-based trunk interfaces

15454-10ME-L1-C=

4x OC-48/STM-16 E-FEC muxponder card, 4x SFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors

15454-10MEX-L1-C=

4x OC-48/STM-16 E-FEC muxponder card, 4x SFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors. Extended version of 15454-10ME-L1-C= leveraging on 2nd Generation MLSE

15454-ADM-10G=

10Gbps E-FEC ADM-On-A-Blade, 16x SFP-based client interfaces, 1x XFP-based interconnection interface, 2x XFP-based trunk interfaces

15454-GE-XP=

GE E-FEC Ethernet Crossponder, 20x SFP-based client interfaces, 2x XFP-based trunk interfaces

15454-GE-XPE=

GE E-FEC Ethernet Enhanced Crossponder, 20x SFP-based client interfaces, 2x XFP-based trunk interfaces

15454-OTU2-XP=

4x OTN E-FEC Multirate Xponder, 2x XFP-based trunk/client FEC interfaces, 2x XFP-based trunk/client E-FEC interfaces

15454-40G-MXP-C=

4x 10-Gbps DPSK 40-Gbps muxponder card, 4x XFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors

15454-40E-MXP-C=

4x10GE/OC192/STM64/OTU2 Muxponder CP-DQPSK Extended Performance

15454-40ME-MXP-C=

4x10GE/OC192/STM64/OTU2 Muxponder CP-DQPSK Metro Edge Performance

15454-40E-TXP-C=

OC-768/STM-256/40GE Transponder CP-DQPSK Extended Performance

15454-40ME-TXP-C=

OC-768/STM-256/40GE Transponder CP-DQPSK Metro Edge Performance

15454-AR-XP=

ONS 15454 Any-Rate Xponder

15454-AR-XP-LIC=

ONS 15454 Any-Rate Xponder – Software license upgradable

15454-AR-XPE=

ONS 15454 Any rate Xponder Enhanced version

15454-AR-MXP=

ONS 15454 Any-Rate Muxponder

15454-AR-MXP-LIC=

ONS 15454 Any-Rate Muxponder – Software license upgradable

15454-M-100G-ME-C=

100G OTU-4 CP-DQPSK Full C Band Tuneable LC Metro Edge

15454-M-100G-LC-C=

100G OTU-4 ITU-T CP-DQPSK Full C Band Tuneable LC

15454-M-100GC-LIC=

100G OTU-4 ITU-T CP-DQPSK Full C Band Tuneable LC – Licensed

15454-M-10X10G-LC=

10x10G Multi rate Client Line Card

15454-M-10X10-LIC=

10x10G Multi rate Client LC Licensed w/ 1 License at 10G

15454-M-LIC-10G=

One Port 10G License for 100G Muxponder

15454-M-LIC-100G=

100G TXP/Reg License for 100G Trunk Line card

15454-M-CFP-LC=

2 x 100G CFP Line Card

Optical Transmission Elements

15454-32-DMX=

32-channel demultiplexer 100-GHz (for use with 32-WSS), C-band, MPO connectors for drop path, LC connector for interconnection, includes one 2m LC/LC fiber-optic cables

15454-32-WSS=

32-channel wavelength selective switch 100-GHz, C-band, MPO connectors for add path, LC connectors for interconnection, includes two 2m LC/LC fiber-optic cables

15454-40-DMX-C=

40-channel demultiplexer 100-GHz (for use with 40-WSS-C, 40-MUX-C or 40-WXC-C), C-band, Odd grid, MPO connectors for drop path, LC connector for interconnection, includes one 2m LC/LC fiber-optic cables

15454-40-DMX-CE=

40-channel demultiplexer 100-GHz (for use with 40-WSS-CE), C-band, Even grid, MPO connectors for drop path, LC connector for interconnection, includes one 2m LC/LC fiber-optic cables

15454-40-MUX-C=

40-channel multiplexer 100-GHz (for use with 40-DMX-C or 40-WXC-C), C-band, Odd grid, MPO connectors for add path, LC connector for interconnection, includes one 2m LC/LC fiber-optic cables

15454-40-WSS-C=

40-channel wavelength selective switch 100GHz, C-band, Odd grid, MPO connectors for add path, LC connectors for interconnection, includes two 2m LC/LC fiber-optic cables

15454-40-WSS-CE=

40-channel wavelength selective switch 100-GHz, C-band, Even grid, MPO connectors for add path, LC connectors for interconnection, includes two 2m LC/LC fiber-optic cables

15454-40-WXC-C=

40-channel wavelength cross connect 100-GHz, C-band, Odd grid, MPO connector for interconnection with Mesh Patch Panel, LC connectors for interconnection, includes one 2m LC/LC fiber-optic cable

15454-80-WXC-C=

80-channel wavelength cross connect 50-GHz, C-band, Odd and Even grid, LC connectors

15454-WXC-LIC=

80-channel wavelength cross connect 50-GHz, C-band, Odd and Even grid, LC connectors – 10ch Licensed Restricted

15454-40-SMR1-C=

40-channel single-module ROADM, 100-GHz, C-band, LC connectors for interconnection and add path, includes one 2-meter LC/LC fiber-optic cable and one 0-dB LC/LC loopback (to be used if DCU is not required). Combines the OSC add/drop filter, a preamplifier and a 2x1 WSS-based ROADM core into a single slot unit.

15454-SMR1-LIC=

40-channel single-module ROADM, 100-GHz, C-band, LC connectors for interconnection and add path, includes one 2-meter LC/LC fiber-optic cable and one 0-dB LC/LC loopback (to be used if DCU is not required). Combines the OSC add/drop filter, a preamplifier and a 2x1 WSS-based ROADM core into a single slot unit, 10-channel license restricted

15454-40-SMR2-C=

40-channel single-module ROADM, 100-GHz, C-band, LC connectors for interconnection, MPO connector for interconnection with Mesh Patch Panel, includes one 0-dB LC/LC loopback (to be used if DCU is not required). Combines the OSC add/drop filter, PRE and BST amplifiers and a 4x1 WSS-based ROADM core.

15454-SMR2-LIC=

40-channel single-module ROADM, 100-GHz, C-band, LC connectors for interconnection, MPO connector for interconnection with Mesh Patch Panel, includes one 0-dB LC/LC loopback (to be used if DCU is not required). Combines the OSC add/drop filter, PRE and BST amplifiers and a 4x1 WSS-based ROADM core. 10-channel license restricted.

15216-MD-40-ODD=

40-Channel Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band – Odd, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets.

15216-MD-40-EVEN=

40-Channel Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band – Even, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets.

15216-EF-40-ODD=

40-Channel Exposed Faceplate Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band – Odd, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets.

15216-EF-40-EVEN=

40-Channel Exposed Faceplate Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band – Even, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets.

15216-MD-48-ODD=

48-Channel Exposed Faceplate Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band – Odd, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets.

15216-MD-48-EVEN=

48-Channel Exposed Faceplate Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band – Even, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets.

15454-AD-4C-xx.x=

4-channel OADM, C-band, 100-GHz, LC connectors, includes two 2-meter LC/LC fiber-optic cables

15216-HD-EXT-PNL=

Edge Mounting Bracket

15216-FLD-4-xx.x=

Edge 4-Channel Bidirectional OADM Module 15xx.xx to 15xx.xx

15216-FLC-CWDM-8=

Edge 8-Channel CWDM Multiplexer/Demultiplexer Module

15216-FLD-OSC=

Edge Optical Service Channel Add/Drop

15454-OPT-AMP-17C=

Optical amplifier, 17dBm output power, 17dB gain, can be configured as preamplifier or booster, C-band, 80-channel, 50-GHz compatible, LC connectors, includes two 2-meter LC/LC fiber-optic cables

15454-OPT-AMP-C=

Enhanced optical amplifier, 20dBm output power, can be configured as preamplifier or booster, C-band, 80-channel, 50-GHz compatible, LC connectors, midstage access, includes one LC/LC loopback (to be used if DCU is not required) and two 2m LC/LC fiber-optic cables

15454-OPT-BST=

Optical booster amplifier, 17dBm output power, C-band, 80-channel, 50-GHz compatible, LC connectors, includes two 2m LC/LC fiber-optic cables

15454-OPT-BST-E=

Optical enhanced booster amplifier, 20dBm output power, C-band, 80-channel, 50-GHz compatible, LC connectors, includes two 2m LC/LC fiber-optic cables

15454-OPT-PRE=

Optical preamplifier, 17dBm output power, C-band, 80-channel, 50-GHz compatible, LC connectors, midstage access, includes one 4-dB LC/LC attenuated loopback (to be used if DCU is not required)

15454-OPT-RAMP-C=

Optical Raman amplifier with embedded EDFA, 500mW total counter-propagating Raman pump power, 17dBm EDFA output power, C-band, 80-channel, 50-GHz compatible, LC connectors, midstage access, includes one LC/LC loopback (to be used if DCU is not required) and two 2m LC/LC fiber-optic cables

15454-OPT-RAMP-CE=

Extended Performance Optical Raman amplifier with embedded EDFA, 500mW total counter-propagating Raman pump power, 2 pump wavelengths, 20dBm EDFA output power, C-band, 80-channel, 50-GHz compatible, LC connectors, midstage access, includes one LC/LC loopback (to be used if DCU is not required) and two 2m LC/LC fiber-optic cables

15454-M-RAMAN-CTP=

High Power Counter-Propagating, 1W optical pump output power, C-band, 96 channel 50GHz Raman unit with 2 LC-LC 2m cables and 2 ES 2000 PS LC 2m cables.

15454-M-RAMAN-COP=

High Power Co-Propagating, 1W optical pump output power, C-band, 96 channel 50GHz Raman unit with 2 ES 2000 PS PC 2m cables.

15454-OPT-EDFA-17=

Enhanced C-band 96 channel low cost amplifier 17 dB max gain, 50 GHz compatible, LC connector, , includes two 2m LC/LC fiber-optic cables

15454-OPT-EDFA-24=

Enhanced C-band 96 channel low cost amplifier 24 dB max gain, 50 GHz compatible, LC connector, , includes two 2m LC/LC fiber-optic cables

15454-OSC-CSM=

Optical service channel card, integrated combiner/separator, 1510nm, LC connectors, includes two 2m LC/LC fiber-optic cables

15454-OSCM=

Optical service channel card, 1510-nm, LC connectors, includes two 2m LC/LC fiber-optic cables

15454-PSM=

Protection Switching Module, LC connectors

15216-DCU-SA=

Dispersion-compensation unit shelf, two module slots, 1RU high. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets.

15216-FBGDCU-<value>=

Low Latency Fiber Bragg Grating Dispersion-compensation module, LC connectors, SMF Fiber, different lengths for C-band as part of the Cisco ONS 15216 Series.

15216-DCU-<value>=

Dispersion-compensation module, LC connectors, different fiber types and lengths for C-band as part of the Cisco ONS 15216 Series. Individual values and parts are captured in the datasheet – Cisco ONS 15216 Dispersion Compensator Unit

15454-TDC-CC=

Tunable Dispersion Compensation Unit Coarse Granularity, tunable from 110ps/nm to 1,650ps/nm with steps of 110ps/nm, C band, LC connectors, includes two 2m LC/LC fiber-optic cables

15454-TDC-FC=

Tunable Dispersion Compensation Unit Fine Granularity, tunable from 45ps/nm to 675ps/nm with steps of 45ps/nm, C Band, LC connectors, includes two 2m LC/LC fiber-optic cables

15216-ID-50=

50 GHz/100GHz Optical Interleaver and De-interleaver Module, single-width module, installs in Cisco FlexLayer shelf assembly (15216-FL-SA)

15216-MD-ID-50=

50-GHz/100-GHz Optical Interleaver and De-interleaver Module, installs in Cisco 15216-MD-40 units

15216-MD-48-CM=

48 channel 50-GHz/100-GHz Optical De-interleaver with Coupler Module, installs in Cisco 15216-EF-40 and 15216-MD-48 units

Pluggable Optics Modules

ONS-SI-155-SR-MM=

OC-3/STM-1 SFP optics module, intermediate-reach, 1310 nm, multimode, industrial temperature, LC connector

ONS-SI-155-I1=

OC-3/STM-1 SFP optics module, intermediate-reach, 1310 nm, single-mode, industrial temperature, LC connector

ONS-SI-155-L2=

OC-3/STM-1 SFP optics module, long-reach, 1550 nm, single-mode, industrial temperature, LC connector

ONS-SC-155-EL=

SFP – STM-1 Electrical, standard coaxial (75 ohm) connector

15454E-SFP-L.4.1=

OC-12/STM-4 SFP optics module, intermediate-reach, 1310 nm, single-mode, LC connector

ONS-SI-622-I1=

OC-12/STM-4/OC-3/STM-1 SFP optics module, intermediate-reach, 1310 nm, single-mode, industrial temperature, LC connector

15454E-SFP-L.16.1=

OC-48/STM-16 SFP optics module, intermediate-reach, 1550 nm, single-mode, LC connector

ONS-SE-2G-S1=

OC-48/STM-16 SFP optics module, short-reach/intra-office, 1310 nm, single-mode, LC connector

ONS-SI-2G-S1=

OC-48/STM-16 SFP optics module, short-reach/intra-office, 1310 nm, single-mode, Industrial Temp, LC connector

ONS-SE-2G-L2=

OC-48/STM-16 SFP optics module, long-reach/long-haul, 1550 nm, single-mode, LC connector

ONS-SI-2G-L2=

OC-48/STM-16 SFP optics module, long-reach/long-haul, 1550 nm, single-mode, Industrial Temp, LC connector

ONS-SE-Z1=

OC-48/STM-16/OC-12/STM-4/OC-3/STM-1 SFP optics module, 1310 nm, single-mode, LC connector

ONS-SC-Z3-XXXX=

OC-48/STM-16/GE SFP optics module, CWDM, XXXX-nm, single-mode, Commercial Temp, LC connector

ONS-SE-200-MM=

ESCON SFP optics module, short-reach, 1310 nm, multimode, LC connector

ONS-SE-G2F-LX=

GE, Fibre Channel (1- and 2-Gbps) and HDTV SFP optics module, long-reach, 1310nm, single-mode, LCconnector

ONS-SE-G2F-SX=

GE and Fibre Channel (1- and 2-Gbps) SFP optics module, short-reach, 850 nm, multimode, LC connector

ONS-SE-GE-ZX=

GE SFP optics module, 1000BASE-ZX interface, 1550 nm, single-mode, LC connector

ONS-SI-GE-ZX=

GE SFP optics module, 1000BASE-ZX interface, 1550 nm, single-mode, Industrial Temp, LC connector

ONS-SE-ZE-EL=

10/100/1000 Ethernet SFP electrical module, BASE-T interface, RJ-45 connector

ONS-SE-4G-SM=

4-Gbps Fibre Channel SFP optics module, 1310 nm, single-mode, LCconnector

ONS-SE-GE-BXU=

GE SFP optics module, 1000BASE BX U, single fiber application – upstream, Extended Temp, 1310 nm TX and 1490 nm RX, single-mode, single LCconnector

ONS-SE-GE-BXD=

GE SFP optics module, 1000BASE BX D, single fiber application – downstream, Extended Temp, 1490 nm TX and 1310 nm RX, single-mode, single LC connector

ONS-SE-4G-MM=

4-Gbps Fibre Channel SFP optics module, 850 nm, multimode, LC connector

ONS-SC-4G-xx.x=

4-Gbps Fibre Channel SFP optics module, DWDM, 15xx.x, 100 GHz, LC connector – Commercial Temp

ONS-SC-2G-xx.x=

OC-48/STM-16 SFP optics module, DWDM, 15xx.x-nm, single mode, LC connector

ONS-XC-10G-SR-MM=

10 GE/10-Gbps Fibre Channel XFP optics module, short-reach, 850 nm, multimode, LC connector

ONS-XC-10G-S1=

OC-192/STM-64/10 GE/10-Gbps Fibre Channel XFP optics module, short-reach, 1310 nm, single-mode, LC connector

ONS-XC-10G-L2=

OC-192/STM-64 XFP optics module, long-reach, 1550 nm, single-mode, LC connector

ONS-XC-10G-I2=

OC-192/STM-64 IR2/10 GE XFP optics module, intermediate-reach, 1550nm, single-mode, LC connector

ONS-XC-10G-xx.x=

OC-192/STM-64/10 GE XFP optics module, DWDM, 15xx.x- nm, single-mode, LC connector

ONS-XC-10G-C=

OC-192/STM-64/10 GE XFP optics module, DWDM, Full C-band Tunable, 50 GHz, single-mode, LC connector

ONS-XC-10G-xxxx=

OC-192/10GE/OTU2, CWDM, xxxx nm, XFP Commercial Temp, 40 km range

ONS-SC-E1-T1-PW=

SFP – E1/DS1 PDH over FE Pseudowire – Commercial Temp

ONS-SC-EoP1=

SFP – FE over DS1/E1 – Commercial Temp

ONS-SC-EOP3=

SFP – FE over DS3/E3 – Commercial Temp

ONS-SC-E3-T3-PW=

SFP-E3/DS-3 PDH over FE Pseudowire – Commercial Temp

ONS-XC-8G-SM=

8-Gbps Fibre Channel XFP SM

ONS-XC-8G-MM=

8-Gbps Fibre Channel XFP MM

ONS-SC-OSC-ULH=

SFP-OC3/STM1/FE Optical Service Channel SFPs ULH–Commercial Temp

ONS-SC-OSC-18.0=

ONS-SC-HD3GV-TX=

ONS-SC-HD3GV-RX=

ONS-CC-100GE-LR4=

SFP FE/OC3/STM1 OSC for RAMAN application 1518.0nm

SFP – 3G HD Video Tx

SFP – 3G HD Video Rx

100GE Basd-CFP – LR4 – Commercial temp

ONS-CC-100G-LR4=

100G Multirate CFP – LR4 – Commercial temp

ONS-CC-40G-LR4=

40G Multirate CFP- LR4 – Commercial Temp

ONS-CC-40G-FR=

CFP-40G-SR4=

40G Multirate CFP- FR – Commercial Temp

40GBASE-SR4 CFP Module with MPO connector

ONS-CXP-100G-SR10=

CXP – 100GBASE-SR – Commercial temp

ONS-XC-10G-96C=

ONS-SC+-10G-SR=

ONS-SC+-10G-LR=

ONS-SC+-10G-ER=

ONS-SC+-10G-ZR=

ONS-SC-+-10G-C=

ONS-SC+-10G-xx.x=

ONS-SC+-10GEPxx.x=

ONS-SC+-10G-CUx=

XFP – 10G 96 ch Full C Band Tuneable DWDM XFP, 50 Ghz, LC

SFP+ SR – Commercial Temp – MM

SFP+ LR – Commercial Temp – SM

SFP+ ER – Commercial Temp – SM

SFP+ ZR – Commercial Temp – SM

SFP+ -10G MR, Full C Band Tuneable DWDM SFP+, 50 Ghz, LC

10G MR, SFP+ 15xx.xnm, 100 GHz, LC – SM

10G MR, Edge Performance SFP+ 15xx.x, 100 GHz, LC – SM

10GBASE-CU SFP+ Active Cable 1m, 3m, 5m and 7m lengths

Cable Assemblies

15454-MPO-MPO-2=

Multi-fiber patchcord – MPO 8-fiber ribbon to MPO 8-fiber ribbon, single mode, 2.0 mm

15454-MPO-XMPO-2=

Multi-fiber patchcord – MPO 8-fiber ribbon to MPO 8-fiber ribbon crossed, single mode, 2.0m, for use with SMR-2 units for Degree-2 ROADM Node configurations (no PP-4-SMR required)

15454-MPO-MPO-4=

Multi-fiber patchcord – MPO 8-fiber ribbon to MPO 8-fiber ribbon, single mode, 4.0m

15454-MPO-MPO-6=

Multi-fiber patchcord – MPO 8-fiber ribbon to MPO 8-fiber ribbon, single mode, 6.0m

15454-MPO-MPO-8=

Multi-fiber patchcord – MPO 8-fiber ribbon to MPO 8-fiber ribbon, single mode, 8.0m

15454-MPO-8LC-2=

Cable assembly, MPO 8-fiber ribbon to 8x LC/PC, single mode, 2.3m

15454-LC-LC-2=

Cable assembly, LC/PC-to-LC/PC, single-mode, 2.0m, 2 mm jacket

15216-LC-LC-5=

Cable assembly, LC/PC-to-LC/PC, single-mode, 4.0m, 2mm jacket

15216-LC-LC-10=

Cable assembly, LC/PC-to-LC/PC, single-mode, 6.0m, 2mm jacket

15216-LC-LC-20=

Cable assembly, LC/PC-to-LC/PC, single-mode, 8.0m, 2mm jacket

15216-LC-LC-MM-2=

Cable assembly, LC/PC-to-LC/PC, multimode, 2.0m, 2mm jacket

15216-LC-LC-MM-5=

Cable assembly, LC/PC-to-LC/PC, multimode, 5.0m, 2mm jacket

15216-LC-SC-5=

Cable assembly, LC/PC-to-SC/UPC, single-mode, 4.0m, 2mm jacket

15216-LC-SC-10=

Cable assembly, LC/PC-to-SC/UPC, single-mode, 6.0m, 2mm jacket

15216-LC-SC-20=

Cable assembly, LC/PC-to-SC/UPC, single-mode, 8.0m, 2mm jacket

15454-MPO-8LC-4=

Multi-fiber patchcord – MPO to 8xLC – 4m

15454-MPO-8LC-6=

Multi-fiber patchcord – MPO to 8xLC – 6m

15454-MPO-8LC-8=

Multi-fiber patchcord – MPO to 8xLC – 8m

ONS-CCC-100G-5=

CXP-CFP MPO cable, 5m long

ONS-CCC-100G-10=

CXP-CFP MPO cable, 10m long

ONS-CCC-100G-20=

CXP-CFP MPO cable, 20m long

Software and User Documentation

SF15454W-R9.6.0K9

15454 ANSI MSTP Rel. 9.6.0 SW, Pre-loaded on TCC2P or TCC3

SF15454M-R9.6.0K9

15454 ANSI MSTP R9.6.0 SW, Pre-loaded on TCC3, TNC/E, TSC/E

15454-LIC-9.6.0K9

15454 ANSI ETSI MSTP Upgrade License for 9.6.0, Right To Use

15454-R9.6.0SWK9

15454 ANSI ETSI MSTP Rel. 9.6.0 Pkgs., DVD, RTU License

15454-R9.6.0SWK9=

15454 ANSI ETSI MSTP Rel. 9.6.0 Pkgs., DVD, RTU License

SF15454WC-R9.6.0K9

15454 ANSI MSTP Rel. 9.6.0 SW-WSON, Pre-loaded on TCC2P-TCC3

SF15454MC-R9.6.0K9

15454 ANSI MSTP R9.6.0SW-WSON,Preload TCC3,TNC,TNCE,TSC,TSCE

15454C-LIC-9.6.0K9

15454 ANSI ETSI MSTP-WSON Upgrade Lic 9.6.0, Right To Use

15454C-R9.6.0SWK9

15454 ANSI ETSI MSTP-WSON Rel. 9.6.0 Pkgs,DVD,RTU License

15454C-R9.6.0SWK9=

15454 ANSI ETSI MSTP-WSON Rel 9.6.0 Pkgs,DVD, RTU License

15454-DOC9.6.0CD=

15454 ANSI ETSI MSTP Sys. Doc. Rel. 9.6.0 English, CD

SF15454WE-R9.6.0K9

15454 ETSI MSTP Rel. 9.6.0 SW, Pre-loaded on TCC2P or TCC3

SF15454ME-R9.6.0K9

15454 ETSI MSTP R9.6.0 SW, Pre-loaded on TCC3, TNC/E, TSC/E

SF15454WECR9.6.0K9

15454 ETSI MSTP Rel. 9.6.0 SW-WSON, Preload on TCC2P,TCC3

SF15454MECR9.6.0K9

15454 ETSI MSTP R9.6.0SW-WSON,Preload TCC3,TNC,TNCE,TSC,TSCE

Warranty

The following are warranty terms that apply to Cisco ONS 15454 MSTP as well as services you may use during the warranty period. Your formal Warranty Statement appears in the Cisco Information Packet that accompanies your Cisco product.

Hardware warranty duration: Five (5) years

Software warranty duration: One (1) year

Hardware replacement, repair, or refund procedure: Cisco or our service center will use commercially reasonable efforts to ship a replacement part for delivery within fifteen (15) working days after receipt of the defective product at the Cisco site. Actual delivery times of replacement products may vary depending on customer location.

Product warranty terms and other information applicable to Cisco products are available at: http://www.cisco.com/go/warranty.

Service and Support

Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business.

For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco Advanced Services.

For More Information

For more information about the Cisco ONS 15454 Multiservice Transport Platform, contact your local account representative or visit Cisco at: www.cisco.com/go/optical or www.cisco.com/go/IPoDWDM.



[1] Wavelength plan is outlined in Tables 3 and 4 in this document. Cisco online lead-time tool is available for determining the lead time of individual wavelengths, if different.