PDF(194.5 KB) View with Adobe Reader on a variety of devices
Updated:November 13, 2008
Document ID:1518933028328363
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Cisco® 1- and 2-Port Enhanced Capability Clear Channel Port Adapters provide a "two-in-one" portfolio that provides both T3 and E3 trunking capabilities.
Product Overview
The Cisco 1- and 2-Port Enhanced Capability Clear Channel Port Adapters for the Cisco 7200 Series Routers (Cisco 7201 and 7301 Routers) are enhanced two-in-one versions (part numbers PA-T3/E3-EC and PA-2T3/E3-EC) of the earlier Clear Channel T3 and E3 port adapters (part numbers PA- T3+, PA-2T3+, PA-E3, and PA-2E3). These new products assist network implementers by minimizing sparing of both T3 port adapters for the United States and E3 for European and Asian implementations. They provide a new software architecture that allows you to select either T3 or E3 by way of software configuration coupled with a more powerful chipset that lowers CPU usage. The new port adapters lower CPU usage by more than 15 percent (Figure 1).
These new port adapters can perform at line-rate performance with lower CPU usage on the Cisco 7200 Series and Cisco 7201 and Cisco 7301 platforms while providing scalable trunking services. Table 1 lists the router platforms and Cisco IOS
® Software releases that support these features.
Table 1. Features
Feature
Supporting Platform
Cisco IOS Software Release
Line-Rate Performance: Up to 34.368 Mbps per E3 Port
Cisco 7204VXR and 7206VXR NPE-400, NPE-G1, and NPE-G2 Network Processing Engines, Cisco 7201, and Cisco 7301
12.4(15)T1, 12.2SRC
Line-Rate Performance: Up to 44.736 Mbps per T3 Port
Cisco 7204VXR, Cisco 7206VXR, Cisco 7201, and Cisco 7301
12.4(15)T1, 12.2SRC
Lower CPU Usage
Cisco 7204VXR, Cisco 7206VXR, Cisco 7201, and Cisco 7301
12.4(15)T1, 12.2SRC
Figure 1. Cisco 1- and 2-Port Enhanced Capability Clear Channel Port Adapters
Applications
The two-in-one capability of the Cisco 1- and 2-Port Enhanced Capability Clear Channel Port Adapters provides easier sparing and provisioning of new T3 or E3 high-capacity corporate backbones, high-speed access to the global Internet, and trunking connections for service provider internetworking. With integrated DS-1 channel service unit/data service unit (CSU/DSU) functions, the port adapters are compatible with the large number of standards-compliant DS-1 CSU/DSUs on the market. As with the existing packet-over-T3 or -E3 port adapters, each T3 or E3 interface can be configured for full-rate or subrate operation that is compatible with a variety of third-party T3 or E3 DSU vendors such as Digital Link, ADC/Kentrox, Larscom, Adtran, and Verilink.
Key Features and Benefits
Table 2 describes the features and benefits of the new port adapters.
Table 2. Features and Benefits of the Cisco 1- and 2-Port Enhanced Capability Clear Channel Port Adapters
Features
Benefits
Operation Modes
Clear Channel T3 or E3 (Unchannelized)
One product provides unchannelized 45-Mbps T3 or 34-Mbps E3 Clear Channel per interface.
Performance*
Line Rate
The new port adapters provide full T3 or E3 line use and throughput.
New Intelligent Software Architecture
Lower CPU use increases router efficiency and improves resource usage, enabling more services:
• High-Level Data Link Control (HDLC) encapsulation: 15% less CPU use for NPE-G1 and NPE-G2
• Frame Relay encapsulation: 10% less CPU use for NPE-G1 and 14% less for NPE-G2
• Point-to-Point Protocol (PPP) encapsulation: 11% less CPU use for NPE-G1 and 13% less for NPE-G2
*Performance constrained only by processing engine
The new port adapters also include the following characteristics:
• One or two DS-3 (T3) or E3 lines
• Asynchronous bit serial PPP and HDLC delineation per RFC 1662 on all channels
• Maximum-transmission-unit (MTU) size: 9000
• Receive and transmit statistics for runts, giants, cyclic-redundancy-check (CRC) errors, and frame-type counts
• Support for the following serial encapsulation protocols:
– Frame Relay
– PPP
– HDLC
DS-3 Features
• Unchannelized DS-3 supporting subrate and scrambling formats for:
– Digital Link DL3100
– ADC/Kentrox DataSMART T3 IDSU
– Larscom Access-T45
– Adtran T3SU 300
– Verilink DLS2100 HDM2182DSUs
• Full duplex and connectivity at DS-3 rate (44.736 Mbps per port)
• DSX-3 level interface with dual female 75-ohm BNC coaxial connectors per port (separate RX and TX)
• Bipolar three zero substitution (B3ZS) line coding
• C-bit parity and M23 framing
• Internal or network clock selectable per DS-3
• Bit-error-rate-test (BERT) pattern generation and detection per DS-3
• T3 local and line loopback
• Generation and termination of DS-3 Maintenance Data Link (MDL) in C-bit framing
• RFC 1407 MIB support
E3 Features
• Unchannelized E3 supporting subrate and scrambling formats for:
– Digital Link DL3100
– ADC/Kentrox DataSMART T3 IDSU
– Larscom Access-T45
– Adtran T3SU 300
– Verilink DLS2100 HDM2182DSUs
• Full duplex and connectivity at E3 rate (34.368 Mbps per port)
• DSX-3 level interface with dual female 75-ohm BNC coaxial connectors per port (separate RX and TX)
• B3ZS line coding
• C-bit parity and M23 framing
• Internal or network clock selectable per T3 or E3
• BERT pattern generation and detection per T3 or E3
• E3 local and line loopback
• Generation and termination of E3 MDL in C-bit framing
• RFC 1407 MIB support
Miscellaneous Features
• Faceplate LEDs for port adapter status
– PA Ready
– Port status
– Active/Loopback status
– Carrier/Alarm status
• Compliant with DS-3 pulse mask per ANSI T1.102-1993
• Compliant with the following ANSI standards:
– ANSI T1.102-1993
– ANSI T1.404-59
– ANSI T1.404-5.10
– ANSI T1.404-5.12-14
– ANSI T1.404
– ANSI T1.107
– ANSI T1.231-1997
– ANSI T1.107 Far-End Alarm and Control Signals (FEAC)
– ANSI T1.404 MDL
– ANSI FDL
• AT&T FDL
• Telcordia GR-499
Feature Availability
Table 3 lists the router platforms, processors, and software releases that support the new two-in-one Cisco 1- and 2-Port Enhanced Capability Clear Channel Port Adapters.
Table 3. Feature Availability
Feature
Supporting Platforms
Network Processing Engines
Cisco IOS Software Release
Cisco Enhanced Capability Port Adapters
Cisco 7204VXR, Cisco 7206VXR, Cisco 7201, Cisco 7301, and Cisco Port Adapter Jacket Card
NPE-400, NPE-G1, and NPE-G2
12.4(15)T1
Product Architecture
The port adapters support new algorithms for managing data. On the transmit side, they can either pull packets out of memory (pull model) or wait until the main processor pushes the packets to the port adapter (push model) for transmission. The push model-the most efficient algorithm-is activated only when the port adapters are installed on a Cisco 7204VXR, Cisco 7206VXR, Cisco 7201, or Cisco 7301 platform with the NPE-400, NPE-G1, and NPE-G2 network processing engines. Additionally, they are two-in-one because they can be software-selectable to operate in either T3 or E3 modes.
Chassis and Processors
The Cisco 1- and 2-Port Enhanced Capability Clear Channel Port Adapters are supported on the platforms and processors listed in Table 4.
Table 4. Chassis and Processor Compatibility
Chassis
Processors and Cisco IOS Software Release
Total Number of Port Adapters Supported per Chassis (Not Line Rate)
Cisco 7204VXR and 7206VXR
NPE-G1-12.4(15)T1, 12.2SRC
Six plus one in the jacket card
NPE-G2-12.4(15)T1, 12.2SRC
Six plus one in the jacket card
NPE-440-12.4(15)T1, 12.2SRC
Six total
Cisco 7201
12.4(15)T1, 12.2SRC
One (one dual- or one single-port adapter)
Cisco 7301
12.4(15)T1, 12.2SRC
One (one dual- or one single-port adapter)
Cisco Port Adapter Jacket Card
12.4(15)T1, 12.2SRC
One (one dual- or one single-port adapter)
Product Specifications
Table 5 lists the specifications of the new port adapters.
Table 5. Product Specifications
Product
Specifications
Physical
• Dimensions (H x W x D): Approximately 1 x 6 5/8 x 7 in. (2.5 x 16.8 x 17.8 cm) overall
• Approximate weight: 2.5 lb. (1.13 kg)
Environmental
• Storage temperature: -38 to 150°F (-40 to 70°C)
• Operating temperature, nominal: 77°F (25°C), ranges from 32 to 104°F (0 to 40°C)
• Operating humidity, nominal: 5 to 85 percent RH non-condensing
• Operating humidity, short-term: 5 to 90 percent RH non-condensing
• Operating altitude: -60 to 2000 meters (196.85 to 6561.68 ft)
Regulatory Compliance
CE Marking
Safety
• CFR 47, Part 15 Class A
• ICES 003 Class A
• UL 60950-1
• IEC 60950-1
• EN 60950-1
• CAN/CSA-C22.2 No. 60950-1
• AS/NZS 60950.1
Emissions Requirements
• CFR 47, Part 15 Class A
• ICES 003 Class A
• CISPR 22 Class A
• EN 55022 Class A
• EN 300386:2001
• EN 61000-3-2:2000
• EN 61000-3-3:2000
• AS/NZS CISPR 22 Class A
• VCCI: V-3/2000.04 Class B
Immunity Requirements
• EN 50082-1
• EN 55024
• EN300 386
• EN61000-6-1
The port adapters meet the following specifications as defined in the reference standards given previously. The approval levels are those required by each country where the product is marketed, sold, and used as detailed by the approval levels of the host system and relevant standards. Investigations will be made against the Cisco quality levels for informational purposes as a measure of system quality. The quality levels are defined as follows:
• EN 61000-4-2 ESD 8kV/15kV
• EN 61000-4-3 Radiated Immunity 10V/m
• EN 61000-4-4 EFT AC 4kV
• EN 61000-4-4 EFT DC 4kV
• EN 61000-4-4 EFT Sign. Line 1kV/2kV
• EN 61000-4-5 Surge AC L-E 4kV
• EN 61000-4-5 Surge AC L-L 2kV
• EN 61000-4-5 Surge DC 1kV
• EN 61000-4-5 Surge Sign. Line 500V
• EN 61000-4-6 RF Conducted Immunity 10V
• EN 61000-4-8 Immunity to Magnetic Fields 30A
• EN 61000-4-11 Voltage Dips and Interruptions AC Line
Ordering Information
To place an order, visit the Cisco
Ordering Home Page and refer to Table 6.
Table 6. Ordering Information
Product Name
Part Number
Cisco 1-Port Enhanced Capability Clear Channel Port Adapter
PA-T3/E3-EC
Cisco 1-Port Enhanced Capability Clear Channel Port Adapter (SPARE)
PA-T3/E3-EC=
Cisco 2-Port Enhanced Capability Clear Channel Port Adapter
PA-2T3/E3-EC
Cisco 2-Port Enhanced Capability Clear Channel Port Adapter (SPARE)
PA-2T3/E3-EC=
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, refer to
Cisco Technical Support Services or
Cisco Advanced Services.
For More Information
For more information about the Cisco 1- and 2-Port Enhanced Capability Clear Channel Port Adapters, contact your local Cisco account representative.
Feedback