PDF(108.0 KB) View with Adobe Reader on a variety of devices
Updated:July 7, 2005
Document ID:1474268933891300
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Cisco
® MGX
® PXM-1E Processor Switch Module enables the Cisco MGX 8830/B and Cisco MGX 8850/B Advanced ATM Multiservice Switch and Voice Gateway with 1.2-Gbps nonblocking standard PNNI switching capacity for cost-effective voice and data applications.
Product Overview
The Cisco MGX PXM-1E Processor Switch Module enables the Cisco MGX 8830/B and MGX 8850/B Advanced ATM Multiservice Switch and Voice Gateway with 1.2 Gbps non-blocking standard PNNI switching capacity for cost-effective voice and data applications. It has a functional, space, and cost-saving design that combines switch fabric, management control, and network interface ports into a single module. It shares the same management capabilities as the Cisco MGX 8800 Series Switches for proven reliability, interoperability, and manageability. Three variations of PXM-1E modules are available with interface speeds ranging from T1/E1 to OC-3/STM-1 to give flexibility in network design. The hot-swappable optical modules minimize initial cost for further capital savings.
Key Features and Benefits
• 1.2 Gbps nonlocking switching capacity: Provides cost-effective switching throughput to meet the demand of service aggregation and voice applications at the service provider's network edge. The module fully supports Hierarchical Private Network-to-Network Interface (PNNI) routing with Multiple Peer Group and mobile PNNI to allow Cisco MGX 8830 and 8850 switches to easily integrate with a large-scale PNNI network.
• Choices of interface speeds and density: The variety of Cisco MGX PXM-1E modules provides different choices of network interface speeds, interface combinations, and density to suit customer needs. Network architects can choose from the 16-port T1/E1 PXM-1E module, the 8-port OC-3/STM-1 module, or the 4-port OC-3/STM-1 and 8-port T3/E3 Combo PXM-1E module. The mix of T3/E3 and OC-3/STM-1 in a single module brings unprecedented flexibility for network connectivity.
• Individually replaceable optical modules: Offer a unique way to minimize network hardware down to the port level. This translates directly into cost savings. Add more optical modules to the 8-port OC-3/STM-1 or the Combo PXM-1E module for easy network expansion at low incremental cost.
• 1:1 redundancy and SONET/SDH Automatic Protection Switching (APS): All Cisco MGX PXM-1E module types support 1:1 redundancy to provide high availability of the switch fabric, control processor function, and network interfaces. This capability is essential for supporting mission-critical services. The optical OC-3/STM-1 interfaces also support SONET/SDH 1+1 APS for facility-failure protection. The added reliability helps service providers, government organizations, and enterprises to sustain reliable services to improve customer satisfaction and reduce support cost.
Technical Specifications
Table 1. Product Specifications
Description
Specification
Product compatibility
Cisco PXM1E-8-155, PXM1E-COMBO, and PXM1E-16-T1E1 modules for Cisco MGX 8850/B and 8850 switches
Cisco 8830-8-155, 8830-COMBO, and 8830-16-T1/E1 modules for Cisco MGX 8830/B and 8830 switches
Management Interface back card PXM-UI-S3/B
Software compatibility
Minimum software: Cisco MGX Switch Software Version 5.1
Cards/Ports
Flexible interface choices offered by various PXM1E front/back card module types:
Cisco PXM1E-8-155 and 8830-8-155: 8 x OC-3c/STM-1. Each optical interface module is hot-swappable.
Cisco PXM1E-COMBO and 8830-COMBO: 8 x T3/E3 and 4 x OC-3/STM-1. Each optical interface module is hot-swappable.
Cisco PXM1E-16-T1E1 and 8830-16-T1E1: 16 x T1/E1 ports. Inverse Multiplexing over ATM (IMA) 1.0 and 1.1 are supported.
Cisco PXM-UI-S3/B back card: Used with any of the above cards for management interfaces, RJ-48 T1/E1 external timing interface, and DB-15 for visual and audible alarm interface.
Redundancy
SONET/SDH 1+1 APS and 1:1 card redundancy for Cisco PXM1E-COMBO, PXM1E-8-155, and PXM1E-4-155 modules and for the Cisco MGX 8830 equivalent
1:1 card redundancy for Cisco PXM1E-8-T3E3 and PXM1E-16-T1E1 modules and the Cisco MGX 8830 equivalent
Synchronization
Clock source from internal Stratum-3, primary and secondary external Building Integrated Timing Supply (BITS) interface, or derived from optical interfaces
ATM Layer
ATM Forum UNI v3.0, v3.1, and v4.0; ITU-T I.361 and I.432; ILMI 4.0
Hierarchical Private Network-to-Network Interface (PNNI) V1.0 dynamic routing with Multiple Peer Group
Preferred Route, Closed User Group, priority bumping, connection grooming
AINI and IISP Interworking
Traffic Management
Traffic Management v4.0 and ITU-T I.371, per ATM Forum UNI v3.1
Programmable enhanced connection admission control to admit connections based on quality of service
Constant bit rate (CBR), variable bit rate real time (VBR-rt), variable bit rate non-real time (VBR-nrt), unspecified bit rate (UBR), available bit rate (ABR-STD)
Up to 16 classes of service
Network Management interfaces
RJ-45 Ethernet port for management interface at the Cisco PXM-UI-S3/B back card, and in-band ATM connection to reach remote node for management connectivity. Miniature D serial port for Cisco IOS® Software control port. DB-15 for visual and audible alarm port. Command-line interface (CLI) for local management, Simple Network Management Protocol (SNMP) for network management system interface, Secure File Transfer Protocol (SFTP) for file transfer, and Secure Shell Versions 1 and 2 (SSHv1 and SSHv2) Protocol for remote access.
Physical Dimensions
Height: 15.83 in. (40.2 cm)
Depth: 15.65 in. (39.8 cm)
Power
DC input voltage range 42-56 VDC, maximum 30A and 1050W input
AC input voltage range 100-120 and 200-240 VAC, maximum 12A at 100VAC, 7A at 200VAC, 1200W input at frequency of 50-60Hz
Operating Environment
Monitoring of cabinet temperature, cooling fan, and supply voltages. LED indicators for card status, network alarms, LAN control port activity, and power status.
EMI/ESD Compliance
FCC Class A / TIA-968-A
ICES 003 Class A
AS/NZS 3548 Class A
CISPR 22 (EN55022) Class A
VCCI Class A
BSMI Class A
IEC/EN 61000-3-2: Power Line Harmonics
IEC/EN 61000-3-3: Voltage Fluctuations and Flicker