Guest

Tandberg Classic 2500

End-of-Sale and End-of-Life Announcement for the Tandberg Classic 2500 Codec

  • Viewing Options

  • PDF (138.2 KB)
  • Feedback

EOL7818

Cisco announces the end-of-sale and end-of-life dates for the Tandberg Classic 2500 Codec. The last day to order the affected product(s) is January 30, 2005. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Tandberg Classic 2500 Codec

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

August 1, 2004

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

January 30, 2005

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

April 30, 2005

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

January 30, 2006

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

January 30, 2006

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

April 27, 2009

Last Date of Support:
HW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

January 31, 2010


HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

CTS-2500-112900N

112900N TANDBERG 2500 384/1.5M NTSC

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500-112900N

112900N TANDBERG 2500 384/1.5M NTSC

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500-112900P

112900P TANDBERG 2500 384/1.5M PAL

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500-112900P

112900P TANDBERG 2500 384/1.5M PAL

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500-CT2-K9=

111650T2 Unit Codec2500-2 All revisions

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500-CT2-K9=

111650T2 Unit Codec2500-2 All revisions

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500-CT2P-K9=

111650T2 Unit Codec2500-2, PAL

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500-CT2P-K9=

111650T2 Unit Codec2500-2, PAL

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500-CT5-K9=

111650T5 Unit Codec2500 Cricket All revisions

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500-CT5-K9=

111650T5 Unit Codec2500 Cricket All revisions

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500-CT5P-K9=

111650T5 Unit Codec2500 Cricket, PAL

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500-CT5P-K9=

111650T5 Unit Codec2500 Cricket, PAL

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500C-1129071N

1129071N Codec 2500 384/1.5M Std NTSC

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500C-1129071N

1129071N Codec 2500 384/1.5M Std NTSC

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500C-1129073N

1129073N Codec 2500 384/1.5M MS NTSC

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500C-1129073N

1129073N Codec 2500 384/1.5M MS NTSC

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500C-112907N

112907N Codec2500 384/2M NTSC

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500C-112907N

112907N Codec2500 384/2M NTSC

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500C-384-US

112000US TANDBERG 2500 384 std. US

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500C-384-US

112000US TANDBERG 2500 384 std. US

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

CTS-2500C-STD-US

112006US Codec2500 384 std. US

CTS-INTP3000-K9

3000 MXP - BW, PreHDCam, 1 Mic, Cbls and Trackers

-

CTS-2500C-STD-US

112006US Codec2500 384 std. US

CTS-INTP6000-K9

6000 MXP - BW, PreHDCam, 2 Mics, Cbls and Trackers 2M/6M

-

Product Migration Options

Customers are encouraged to migrate to the Cisco TelePresence System Integrator Package 3000 MXP or Cisco TelePresence System Integrator Package 6000 MXP.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html
Customers may be able to continue to purchase the Tandberg Classic 2500 Codec through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html
For more information about the Cisco Product Warranties, go to: http://www.cisco.com/en/US/products/prod_warranties_listing.html
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.