Tandberg 770 880 990 MXP Series

End-of-Sale and End-of-Life Announcement for the Tandberg Legacy Set-Top Upgrade Licenses

Let Us Help

  • Viewing Options

  • PDF (110.7 KB)
  • Feedback


Cisco announces the end-of-sale and end-of-life dates for the Tandberg Legacy Set-Top Upgrade Licenses. The last day to order the affected product(s) is September 23, 2013. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

Table 1. End-of-Life Milestones and Dates for the Tandberg Legacy Set-Top Upgrade Licenses




End-of-Life Announcement Date

The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.

March 25, 2013

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

September 23, 2013

Last Ship Date:
App. SW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

December 22, 2013

End of SW Maintenance Releases Date:
App. SW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

September 23, 2014

End of New Service Attachment Date:
App. SW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

September 23, 2014

End of Service Contract Renewal Date:
App. SW

The last date to extend or renew a service contract for the product.

December 20, 2015

Last Date of Support:
App. SW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

September 30, 2016

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description


Order L-LEG-EP-PAK For Settop 770 to 880 Upg


Order L-LEG-EP-PAK For Settop 880 to 990 Upg


Order L-MXP-PAK For MS Upg For Legacy Settop 880-990


Order L-MXP-PAK For NPP Upg For Legacy Settop 770-990


Order L-MXP-PAK For PP Upg For Legacy Settop 550


Order L-MXP-PAK For 128 ISDN/768 IP Upg For Settop 550


Order L-MXP-PAK For 384 ISDN/768 IP Upg For Settop 550


Order L-MXP-PAK For 128 ISDN/768 IP Upg For Settop 770


Order L-MXP-PAK for 384 ISDN/1, 1M IP Upg for Settop 880


Order L-MXP-PAK For 512 ISDN/2M IP Upg For Settop 990

Product Migration Options

There is no replacement available for the Tandberg Legacy Set-Top Upgrade Licenses at this time.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at
Customers may be able to continue to purchase the Tandberg Legacy Set-Top Upgrade Licenses through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to:
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to:

For More Information

For more information about the Cisco End-of-Life Policy, go to:
For more information about the Cisco Product Warranties, go to:
To subscribe to receive end-of-life/end-of-sale information, go to:

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application:
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.