Guest

Cisco Small Business SPA300 Series IP Phones

Cisco SPA 301 1-Line IP Phone Data Sheet

  • Viewing Options

  • PDF (184.4 KB)
  • Feedback

Cisco_SMB_Badge_Green_RGB_

Basic, Affordable, IP Phone for Business or Home Office

Highlights

• Basic 1-line business-class IP phone

• Connects directly to an Internet telephone service provider or to an IP private branch exchange (PBX)

• Easy installation and secure remote provisioning, as well as web-based configuration

• Supports both Session Initiation Protocol (SIP) and Smart Phone Control Protocol (SPCP) with the Cisco® Unified Communications 500 Series

Figure 1. Cisco SPA 301 1-Line IP Phone

Comprehensive Interoperability and SIP-Based Feature Set

Based on SIP, the Cisco SPA 301 1-Line IP Phone has been tested to help ensure comprehensive interoperability with equipment from voice over IP (VoIP) infrastructure leaders, enabling service providers to quickly roll out competitive, feature-rich services to their customers.
With hundreds of features and configurable service parameters, the Cisco SPA 301 addresses the requirements of traditional business users while building on the advantages of IP telephony. Features such as easy station moves and shared line appearance (across local and geographically dispersed locations) are just some of the many advantages of the SPA 301.

Carrier-Grade Security, Provisioning, and Management

The Cisco SPA 301 uses standard encryption protocols to perform highly secure remote provisioning and unobtrusive in-service software upgrades. Remote provisioning tools include detailed performance measurement and troubleshooting features, enabling network providers to deliver high-quality support to their subscribers. Remote provisioning also saves service providers the time and expense of managing, preloading, and reconfiguring customer premises equipment.

Telephony Features

• One voice line

• Music on hold*

• Call waiting

• Outbound caller ID blocking**

• Call transfer: attended and blind** ( SIP Only )

• Three-way call conferencing with local mixing

• Multiparty conferencing via external conference bridge

• Automatic redial of last calling and last called numbers

• Call pickup: selective and group*

• Call swap

• Call back on busy**

• Call blocking: anonymous and selective**

• Call forwarding: unconditional, no answer, and on busy**

• Hot line and warm line automatic calling

• Digits dialed with number auto-completion

• Anonymous caller blocking**

• Support for Uniform Resource Identifier (URI) (IP) dialing (vanity numbers)

• Multiple ring tones with selectable ring tone per line

• Call duration and start time stored in call logs in web GUI

• Distinctive ringing based on calling and called number

• 10 user-downloadable ring tones

• Speed dialing, eight entries

• Configurable dial/numbering plan support

• Intercom*

• Group paging

• Network Address Translation (NAT) Traversal, including Serial Tunnel (STUN) support

• DNS SRV and multiple A records for proxy lookup and proxy redundancy

• Syslog, debug, report generation, and event logging

• Support for highly secure encrypted voice communications

• Built-in web server for administration and configuration, with multiple security levels

• Automated remote provisioning, multiple methods; up to 256 bit encryption (HTTP, HTTPS, Trivial File Transfer Protocol [TFTP])

• Option to require administrator password to reset unit to factory defaults

 
**Feature requires support by call server.
**Feature activated via feature code

Hardware Features

• Voicemail message waiting indicator light

• Voicemail message retrieval button

• Volume control

• Redial Button

• Flash Button

• Standard 12-button dialing pad

• High-quality handset

• One Ethernet WAN port 10/100BASE-T RJ-45

• 5 VDC universal (100-240V) switching power adaptor included

Regulatory Compliance

• FCC (Part 15, Class B) ,UL, CE Mark, A-Tick

Security Features

• Password-protected system, preset to factory defaults

• Password-protected access to administrator and user-level features

• HTTPS with factory-installed client certificate

• HTTP digest: encrypted authentication via MD5 (RFC 1321)

• Up to 256-bit Advanced Encryption Standard (AES) encryption

Documentation

• Quick-start installation and configuration guide

• User guide

• Administration guide

• Provisioning guide (for service providers only)

Package Contents

• Cisco SPA 301 IP phone, handset

• Handset cord

• RJ-45 Ethernet cable

• Power adapter

• Quick installation guide

• CD

Specifications

Table 1 provides specifications for the Cisco SPA 301 1-Line IP Phone.

Table 1. Specifications for the Cisco SPA 301 1-Line IP Phone
Note: Many features are programmable within a defined range or list of options. Please see the SPA Administration Guide for details. The target configuration profile is uploaded to the SPA 301 at the time of provisioning.

Description

Specification

Data networking

• MAC address (IEEE 802.3)
• IPv4 (RFC 791)
• Address Resolution Protocol (ARP)
• DNS: A record (RFC 1706), SRV record (RFC 2782)
• Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)
• Internet Control Message Protocol (ICMP) (RFC 792)
• TCP (RFC 793)
• User Datagram Protocol (UDP) (RFC 768)
• Real Time Protocol (RTP) (RFC 1889, 1890)
• Real Time Control Protocol (RTCP) (RFC 1889)
• Real Time Control Protocol - Extended Report (RFC 3611)
• Differentiated Services (DiffServ) (RFC 2475)
• Type of service (ToS) (RFC 791, 1349)
• VLAN tagging 802.1p/Q: Layer 2 quality of service (QoS)
• Simple Network Time Protocol (SNTP) (RFC 2030)

Voice gateway

• SIP version 2 (RFC 3261, 3262, 3263, 3264)
• SPCP with the Cisco Unified Communications 500 Series
• SIP proxy redundancy: dynamic via DNS SRV, A records
• Re-registration with primary SIP proxy server
• SIP support in NAT networks (including STUN)
• SIPFrag (RFC 3420)
• Highly secure (encrypted) calling via Secure Real-Time Transport Protocol (SRTP)
• SIP/TLS
• Codec name assignment
• Voice algorithms:
• G.711 (A-law and μ-law)
• G.726 (16/24/32/40 kbps)
• G.729 AB
• G.722
• Dynamic payload support
• Adjustable audio frames per packet
• Dual-tone multifrequency (DTMF), in-band and out-of-band (RFC 2833) (SIP INFO)
• Flexible dial plan support with interdigit timers
• IP address/URI dialing support
• Call progress tone generation
• Jitter buffer: adaptive
• Frame loss concealment
• Voice activity detection (VAD) with silence suppression
• Attenuation/gain adjustments
• Message waiting indicator (MWI) tones
• Voicemail waiting indicator (VMWI), via NOTIFY, SUBSCRIBE
• Caller ID support (name and number)
• Third-party call control (RFC 3725)

Provisioning, administration,
and maintenance

• Integrated web server provides web-based administration and configuration
• Automated provisioning and upgrade via TFTP, HTTP or HTTPS
• Asynchronous notification of upgrade availability via NOTIFY
• Nonintrusive in-service upgrades
• Report generation and event logging
• Statistics transmitted in BYE message
• RTCP-XR
• Syslog and debug server records: configurable per line

Power supply

• Switching type (100-240V) automatic
• DC input voltage: +5 VDC at 1.0A maximum

Physical interfaces

• One 10/100BASE-T RJ-45 Ethernet port (IEEE 802.3)
• Handset: RJ-9 connector

Indicator lights/LED

• Message waiting indicator LED

Dimensions (W x H x D)

7.76 x 3.82 x 1.77 inches (194 x 97 x 45 mm)

Unit weight

1.7 lb ( 0.7711 kg)

Operating temperature

32º ~ 113ºF (0º ~ 40ºC)

Storage temperature

-13º ~ 185ºF (-20º ~ 70ºC)

Operating humidity

5% to 95% noncondensing

Storage humidity

5% to 95% noncondensing

Table 2 compares the SPA 301 with other Cisco Small Business 500 Series IP Phones.

Table 2. Cisco Small Business 500 and 300 Series IP Phones Comparison

Model

Voice Lines

Ethernet Ports

High-Resolution Graphical Display

Power over Ethernet (PoE) Support

SPA 301G

1

1

No

No

SPA 303G

3

2

Yes

No

SPA 501G

8

2

No

Yes

SPA 502G

1

2

Yes

Yes

SPA 504G

4

2

Yes

Yes

SPA 508G

8

2

Yes

Yes

SPA 509G

12

2

Yes

Yes

SPA 525G

5

2

Color

Yes

Tables 3 and 4 provide ordering information for the Cisco SPA 301 and accessories.

Table 3. Ordering Information

Part Number

Description

SPA301-G1

Cisco SPA 301G, North America power adapter

SPA301-G2

Cisco SPA 301G, Europe power adapter

SPA301-G3

Cisco SPA 301G, UK power adapter

SPA301-G4

Cisco SPA 301G, Australia power adapter

CON-SBS-SVC1

3-year Cisco Small Business Support Service

Table 4. Optional Accessories

Part Number

Description

MB100

Wall-mount brackets for SPA 300, SPA 500, CP 500, and SPA 900 Series

 

Service & Support

The Cisco Small Business Support Service provides three years affordable peace of mind coverage, to help protect your investment and derive maximum value from Cisco Small Business solution. The subscription-based service offers software updates, access to the Cisco Small Business Support Center, online chat support, and expedited hardware replacement.

Warranty

Cisco Small Business IP Phones are covered by a Cisco 1-year limited hardware warranty with return to factory replacement and a 90-day limited software warranty. In addition, Cisco offers software updates for bug fixes for the warranty term, and telephone technical support at no charge for the first 12 months following the date of purchase.
To download software updates, go to: http://www.cisco.com/go/300phones.
Product warranty terms and other information applicable to Cisco products are available at http://www.cisco.com/go/warranty.

For More Information

For more information on Cisco Small Business products and solutions, visit http://www.cisco.com/smallbusiness.