Guest

Cisco Media Gateway Controller Node Manager

End-of-Sale and End-of-Life Announcement for the Cisco Media Gateway Control Node Manager 2.6(1) and Voice Services Provisioning Tool 2.6(1)

  • Viewing Options

  • PDF (97.8 KB)
  • Feedback

EOL6434

Cisco® announces the end-of-sale and end-of life dates for the Cisco Media Gateway Control Node Manager 2.6(1) and Voice Services Provisioning Tool 2.6(1). The last day to order the affected product(s) is November 7, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco Media Gateway Control Node Manager 2.6(1)

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

May 9, 2008

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

November 7, 2008

Last Ship Date:
App. SW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

February 5, 2009

End of SW Maintenance Releases Date:
App. SW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

November 7, 2009

End of New Service Attachment Date:
App. SW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

November 7, 2009

End of Service Contract Renewal Date:
App. SW

The last date to extend or renew a service contract for the product.

February 3, 2011

Last Date of Support:
App. SW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

November 7, 2011

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

EMS-MNM-KIT-261K9

Cisco MNM 2.6(1) media kit crypto aware, incl. EMS, CV

EMS-MNM-KIT-273K9

Cisco MNM 2.7(3) media kit, incl CDs for CEMF,CiscoWorks

EMS-MNM-KIT-261K9=

Cisco MNM 2.6(1) media kit crypto aware, incl. EMS, CV

EMS-MNM-KIT-273K9=

Cisco MNM 2.7(3) media kit, incl CDs for CEMF,CiscoWorks

EMS-MNM-KIT-261K9D

Cisco MNM 2.6(1) crypto aware, 30day demo, incl. EMS,CV

EMS-MNM-KIT273K9D

Cisco MNM 2.7(3) 30day demo, includes all media kit CDs

EMS-MNM-KIT-261K9U

Cisco MNM Media Kit Upgrade, req previous version

EMS-MNM-KIT273K9U

Cisco MNM 2.7(3) media kit upgrade requires previous version

EMS-MNM-LIC-261

Cisco MNM 2.6(1) Right to Use License - sold in 1k DS0 block

EMS-MNM-LIC-273

Cisco MNM 2.7(3) Right to Use License - sold in 1k DS0 block

EMS-MNM-LIC-261-U

Cisco MNM 2.6(1) Right to Use License upgrd - 1k DS0 blocks

EMS-MNM-LIC-273-U

Cisco MNM 2.7(3) Right to Use License upgrade - 1k DS0

EMS-MNM-LIC-261U=

Cisco MNM 2.6(1) Right to Use License upgrade - spare

There is currently no replacement product available for this product.

 

Product Migration Options

Customers are encouraged to migrate to the Cisco Media Gateway Control Node Manager 2.7(3) when installing Cisco PGW 2200 Softswitch Release 9.7(3). Information about this product can be found at http://www.cisco.com/en/US/products/sw/netmgtsw/ps1912/index.html.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Cisco Media Gateway Control Node Manager 2.6(1) through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.

For More Information

For more information about the Cisco Media Gateway Control Node Manager 2.7(3), visit http://www.cisco.com/en/US/products/sw/netmgtsw/ps1912/index.html, or contact your local account representative.
To request information about the Cisco Media Gateway Control Node Manager 2.7(3), send an e-mail to mcmnm-pt@cisco.com.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.