Guest

Cisco Bandwidth Quality Manager

EoS and EoL Announcement for the Cisco Bandwidth Quality Manager 3.1 and 3.2

  • Viewing Options

  • PDF (110.3 KB)
  • Feedback

EOL6198

Cisco® announces the end-of-sale and end-of life dates for the Cisco Bandwidth Quality Manager 3.1 and 3.2. The last day to order the affected product(s) is January 30, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1

Table 1. End-of-Life Milestones and Dates for the Cisco Bandwidth Quality Manager 3.1 and 3.2

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

October 31, 2007

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

January 30, 2008

Last Ship Date:
App. SW, HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

April 29, 2008

End of SW Maintenance Releases Date:
App. SW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

January 29, 2009

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

January 29, 2009

End of New Service Attachment Date:
App. SW, HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

January 29, 2009

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

April 27, 2012

End of Service Contract Renewal Date:
App. SW

The last date to extend or renew a service contract for the product.

April 30, 2010

Last Date of Support:
HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

January 28, 2013

Last Date of Support:
App. SW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

January 29, 2011


HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

CBQME-1180-K9

Cisco Bandwidth Quality Manager Engine 3.1 -100 remote sites

See the Product Migration Options section below for detailed information on replacing this product.

Replaced by ADE 2130 platform

CBQME-1180-UP-K9

Cisco BQM Engine 3.1 Upgrade -100 remote sites

See the Product Migration Options section below for detailed information on replacing this product.

Replaced by ADE 2130 platform

CBQME-1180T-K9

Cisco BQM 3.1 Telepresence-10 remote sites

See the Product Migration Options section below for detailed information on replacing this product.

Replaced by ADE 2130 platform

CBQME-3.1-SW-K9

Cisco BQM Engine 3.1 software loaded on Cisco 1180

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.1-SWT-K9

Cisco BQM 3.1-Telepresence software

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.1-SWUP-K9

Cisco BQM Engine 3.1 software loaded on Cisco 1180 Upgrade

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-10-LC

Cisco BQM License - for additional 10 sites

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-10-LC=

Cisco BQM License - for additional 10 sites

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-100MLC

Cisco BQM 100Mb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-100MLC=

Cisco BQM 100Mb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-10MLC

Cisco BQM 10Mb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-10MLC=

Cisco BQM 10Mb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-1GLC

Cisco BQM 1Gb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-1GLC=

Cisco BQM 1Gb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-500MLC

Cisco BQM 500Mb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-500MLC=

Cisco BQM 500Mb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-50MLC

Cisco BQM 50Mb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-50MLC=

Cisco BQM 50Mb/s Bandwidth Processing License

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-3.2-SW10-K9

Cisco BQM SW lic - 10Mbps of monitored BW, 10 remote sites

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-PCI

Cisco BQM Engine-Fixed PCI card with 4 port 10/100/1000 Mbps

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-PCI-2

Cisco BQM Engine-PCI card 2 active + 2 SFP optional

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-PCI-2=

Cisco BQM Engine-PCI card 2 active + 2 SFP optional

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-PCI-4

Cisco BQM Accelerator card - fixed PCI card, four 1Gbps port

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-PCI-4=

Cisco BQM Accelerator card - fixed PCI card, four 1Gbps port

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-PCI-4M

Cisco BQM Accelerator card - Modular PCI card, needs 4 SFPs

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-PCI-4M=

Cisco BQM Accelerator card - Modular PCI card, needs 4 SFPs

See the Product Migration Options section below for detailed information on replacing this product.

 

CBQME-PCI-M

Cisco BQM Engine- Modular PCI card requires SFPs purchase

See the Product Migration Options section below for detailed information on replacing this product.

 

Product Migration Options

Customers are encouraged to migrate to the Cisco Bandwidth Quality Manager 4.0 release and the Application Deployment Engine series of hardware platforms. Information about these products can be found in the BQM 4.0 product bulletin at: http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6341/ps6385/ps8796/prod_bulletin0900aecd806d3acb.html

For More Information

For more information about the Cisco Bandwidth Quality Manager 4.0, visit http://www.cisco.com/en/US/products/ps6385/index.html, or contact your local account representative.
To request information about the Cisco Bandwidth Quality Manager 4.0, send an e-mail to bqm-product-info@external.cisco.com
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/prod_end_of_life.html
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice