Guest

Cisco Application Deployment Engine

Cisco Application Deployment Engine 2140

  • Viewing Options

  • PDF (115.6 KB)
  • Feedback

Product Overview

Cisco ® Application Deployment Engine (ADE) 2140 is a standardized platform for Cisco appliance-based applications. Depending on the software packages with which Cisco ADE 2140 is deployed, its configuration can vary. However, all Cisco ADE 2140 platform products share a common base configuration:

• Dual Intel quad-core processors

• Up to 16 GB of Error Correcting Code (ECC) RAM

• Two integrated 10/100/1000T gigabit Ethernet network interface ports

• Six SAS hard drive bays, which may be populated with hot swappable, RAID configurable, server grade drives.

• Rack rail options suitable for either a 2-post telco-style rack or a 4-post server rack

• 2RU (3.4 in. / 8.6 cm height) form factor, 20.2 in / 51.2 cm depth

• PCI expansion slots

Primary Features And Benefits

Performance

Cisco ADE 2140 is a very high performance computing platform designed to support Cisco appliance-based applications.

Memory

Cisco ADE 2140 supports up to 16 GB of memory with server-grade error correction.

Variable-Speed Fan Support

Cisco ADE 2140 includes variable-speed fans to reduce operating noise. Through the use of temperature sensors within the server, the speed of the fans is adjusted to maintain the proper cooling. This reduces the noise generated by the fans by operating them only when required and at a speed based upon the cooling requirements.

Service and Customer Support

Service Plans

Cisco ADE 2140 platform applications will be supported by and stocked in Cisco global spares depots. Cisco ADE 2140 will offer service plans for the basic SMARTnet ® contracts.

System Diagnostic LEDs

Cisco ADE 2140 provides a bank of system-diagnostic LEDs on the front of the system to assist Cisco support engineers in identifying the system state and any potential issues.

Product Specifications

Table 1 lists the specifications for Cisco ADE 2140.

Table 1. Cisco Application Deployment Engine 2140 Specifications.

Processor

Processor (CPU)

X86 architecture CPU

Processors installed

2

Basic input/output system (BIOS) type

Flash memory

Memory

Memory maximum

Up to 16 GB

Hard Disk

Hard disk bays

6

Hard disk interface type

Serial Attached SCSI (SAS)

MTBF of hard drives

1.0 Mhours (40C)

Power-on hours

24h / 7d (70-80% duty cycle)

RAID Configuration

HW RAID through integrated Intel hardware RAID controller

Battery backed write cache - configurable to 512MB

Software RAID configurable (0,1,5,10,50)

Hot Swappable

Yes

Optical Storage

DVD-ROM

1 front accessible (8X DVD read, 24X CD read)

Interfaces

Ethernet

2 x 10/100/1000 RJ-45 interfaces (2 more)

Serial ports

1

USB 2.0 ports

3 (1 at front and 2 at back of chassis)

Expansion Options

PCI-* non-hot plug slots 133-MHz and 64-bit slots

3 133 MHz PCI-X slots, FH and FL

2 PCI-E x4 slots (low profile)

Power

Maximum power consumption

980W (maximum input, power supply rating)
600W (maximum output, power supply rating)

Autoranging AC input

Yes

PFC

Yes

Input low range

100 to 120 (nominal) VAC; 50-60 Hz

Input high range

200 to 240 (nominal) VAC; 50-60 Hz

Input kilovolt-amperes (kVA) approximately

Maximum configuration 0.290 kVA

Environmental

Air temperature - Server on

50 to 95°F (10 to 35°C)

Air temperature - Server off

-40 to 158°F (-40 to 70°C)

Humidity

Server off: 95%, noncondensing at +35°C

Cooling system

3 fans installed (two are in the power supply)
2 blowers installed

Dimensions

Form factor

2 rack-mount units

Rack mounting

2-post, 4-post rack mounting options available

Weight

35.0 lb (15.8 kg), base chassis

Height

3.4 in. (8.8 cm)

Width

17.0 in. (432 mm)

Depth

20.0 in. (508 mm) without bezel or mounting hardware

Equipment Approvals and Safety

Regulatory Standards Compliance: Safety and EMC

Specification

Description

Comments

Regulatory Compliance

Products with the CE Marking indicate compliance with the 2004/108/EC and 2006/95/EC directives

 

Safety

UL 60950

CAN/CSA-C22.2 No. 60950

EN 60950

IEC 60950

AS/NZS 60950

ITE

ITE

ITE

ITE

ITE

EMC - Emissions

47CFR Part 15 Class A

AS/NZS CISPR22 Class A

CISPR22 Class A

EN55022 Class A

ICES003 Class A

VCCI Class A

EN61000-3-2

EN61000-3-3

KN22 Class A

CNS13438 Class A

ITE

ITE

ITE

ITE

ITE

ITE

ITE

ITE

EMC - Immunity

EN50082-1

EN61000-6-1

EN55024

CISPR24

KN immunity series

ITE

ITE

ITE

ITE

Service and Support

Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services.

Warranty Information

Cisco offers a 90-day limited hardware warranty standard on Cisco ADE platforms. For terms and conditions of this warranty, refer to Cisco 90-Day Limited Hardware Warranty Terms.