Guest

Cisco Application Deployment Engine

Cisco Application Deployment Engine 2130

  • Viewing Options

  • PDF (180.4 KB)
  • Feedback

Product Overview

Cisco ® Application Deployment Engine (ADE) 2130 is a standardized platform for Cisco appliance-based applications. Depending on the software packages with which Cisco ADE 2130 is deployed, its configuration can vary. However, all Cisco ADE 2130 platform products share a common base configuration:

• Intel quad-core processor

• Up to 16 GB error-correcting code (ECC) RAM

• Two integrated 10/100/1000T Gigabit Ethernet network interface ports

• Six Serial Attached SCSI (SAS) hard drive bays, which may be populated with hot-swappable, Redundant Array of Independent Drives (RAID) -configurable, server-grade drives.

• Rack-rail options suitable for either a two-post telco-style rack or a four-post server rack

• 2 rack-mount unit (3.4 in./8.7 cm height) form factor, 20.2 in./51.2 cm depth

• Peripheral Component Interconnect (PCI) expansion slots

Primary Features and Benefits

Performance
Cisco ADE 2130 is a high-performance computing platform designed to support Cisco appliance-based applications.
Memory
Cisco ADE 2130 supports up to 16 GB of memory with server-grade error correction.
Variable-Speed Fan Support
Cisco ADE 2130 includes variable-speed fans to reduce operating noise. Through the use of temperature sensors within the server, the speed of the fans is adjusted to maintain the proper cooling. Noise generated by the fans is reduced by operating them only when required and at a speed based upon the cooling requirements.

Service and Customer Support

Service Plans
Cisco ADE 2130 platform applications will be supported by and stocked in Cisco global spares depots. Cisco ADE 2130 will offer service plans for the basic SMARTnet ® contracts.
System-Diagnostic LEDs
Cisco ADE 2130 provides a bank of system-diagnostic LEDs on the front of the system to assist Cisco support engineers in identifying the system state and any potential issues.

Product Specifications

Table 1 lists the specifications for Cisco ADE 2130.

Table 1. Cisco Application Deployment Engine 2130 Specifications

Processor

Processor (CPU)

X86 architecture CPU

Processors installed

1 quad core

Basic input/output system (BIOS) type

Flash memory

Memory

Memory maximum

Up to 16 GB

Hard Disk

Hard disk bays

6

Hard disk interface type

Serial Attached SCSI

Mean time between failure (MTBF) of hard drives

1.0 Mhours (40C)

Power-on hours

24 hours/7 days (70-80 percent duty cycle)

RAID configuration

Hardware RAID through integrated Intel hardware RAID controller (optional)

Battery-backed write cache - configurable to 512 MB

Software RAID configurable (0, 1, 5, 10, 50)

Hot swappable

Yes

Optical Storage

DVD-ROM

1 front accessible (8X DVD read, 24X CD read)

Interfaces

Ethernet

2 x 10/100/1000 RJ-45 interfaces (2 more optional)

Serial ports

1

USB 2.0 ports

3 (1 at front and 2 at back of chassis)

Expansion Options

PCI non-hot-swappabl plug slots: 133-MHz and 64-bit slots

3 133 MHz PCI-X slots, FH and FL

2 x 4 PCI-E slots (low profile)

Power

Maximum power consumption

980 W (maximum input, power supply rating)
600 W (maximum output, power supply rating)

Autoranging AC input

Yes

PFC (Power factor correction

Yes

Input low range

100 to 120 (nominal) VAC; 50-60 Hz

Input high range

200 to 240 (nominal) VAC; 50-60 Hz

Input kilovolt-amperes (kVA) approximately

Maximum configuration 0.290 kVA

Environmental

Air temperature - Server on

50 to 95°F (10 to 35°C)

Air temperature - Server off

-40 to 158°F (-40 to 70°C)

Humidity

Server off: 95 percent, noncondensing at +35°C

Cooling system

3 fans installed (two are in the power supply)
2 blowers installed

Dimensions

Form factor

2 rack-mount unit

Rack mounting

2-post, 4-post rack-mounting options available

Weight

35.0 lb (15.8 kg), base chassis

Height

3.45 in. (88 mm)

Width

17.0 in. (432 mm)

Depth

20.0 in. (508 mm) without bezel or mounting hardware

Equipment Approvals and Safety

Regulatory Standards Compliance: Safety and EMC

Specification

Description

Comments

Regulatory compliance

Products with the CE marking indicate compliance with the 89/336/EEC (replaced by 2004/108/EC effective 20 July 2007) and 2006/95/EC directives.

 

Safety

UL 60950

CAN/CSA-C22.2 No. 60950

EN 60950

IEC 60950

AS/NZS 60950

Information Technology Equipment (ITE)

ITE

ITE

ITE

ITE

Electro Magnetic Compatibility (EMC) - Emissions

47CFR Part 15 Class A

AS/NZS CISPR22 Class A

CISPR22 Class A

EN55022 Class A

ICES003 Class A

VCCI Class A

EN61000-3-2

EN61000-3-3

KN22 Class A

CNS13438 Class A

ITE

ITE

ITE

ITE

ITE

ITE

ITE

ITE

Korea if applicable

Taiwan if applicable

EMC - Immunity

EN50082-1

EN61000-6-1

EN55024

CISPR24

KN immunity series

ITE

ITE

ITE

ITE

Korea - ITE/TNE

Service and Support

Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services.

Warranty Information

Cisco offers a 90-day limited hardware warranty standard on Cisco ADE platforms. For terms and conditions of this warranty, refer to Cisco 90-Day Limited Hardware Warranty Terms.