Changing Address Settings
You can change the following address information for the Media Server from the Addressing tab: IP address, DNS information, and the Ethernet port speed and duplex.
Procedure
- In the MSA interface, on the sidebar, do one of the following:
- Click Board (for a Cisco Unified MeetingPlace 3545 Media Server).
- Click Device (for a Cisco Unified MeetingPlace 3515 Media Server).
- Click the Addressing tab.
- To change an IP address setting, perform one of the following steps:
- Enter the IP address that you want to assign to the Media Server in the IP Address field.
- Enter the IP address of the router that you want the Media Server to use in the Router IP field.
- Enter the subnet mask that you want the Media Server to use in the Subnet Mask field.
- Choose the Ethernet port and duplex speed value that you want to set in the Port settings field.
- Click Upload from the toolbar.
Copyright © 2002-2008, Cisco Systems, Inc. All rights reserved.