Setting the Time and Date
Procedure
- In the MSA interface, on the sidebar, do one of the following:
- Click Board (for a Cisco Unified MeetingPlace 3545 Media Server).
- Click Device (for a Cisco Unified MeetingPlace 3515 Media Server).
- Click the Basics tab.
- Next to the Date/Time field, click Change.
The Change Time dialog box appears. The date and time the Audio Blade [Cisco Unified MeetingPlace 3515 Media Server] reports appear in the Set time to field.
- In the Change field, select the unit of time that you want to change.
Note There is no unit to change AM and PM. This designation rolls automatically when the hour rolls past 12 backward or forward. Similarly, seconds roll minutes, minutes roll hours, hours roll days, and days roll months.
- In the Set board time to field, choose the up or down arrow to change that unit.
The unit you choose changes in the direction you choose: higher (up) or lower (down).
- Select NTP enabled to synchronize the time with a network server clock, and to select time zone settings.
- On the toolbar, click Upload.
Copyright © 2002-2008, Cisco Systems, Inc. All rights reserved.